• On sale!

ESP32 Thing Control Power Shield - power switch 5-28V / 5A for ESP32 Thing - SparkFun DEV-14155

Index: SPF-09330 EAN: 5904422313173

Board for ESP32 Thing module that allows you to control devices with current up to 5 A and voltage from 5 V to 28 V.

ESP32 Thing Control Power Shield - power switch 5-28V / 5A for ESP32 Thing - SparkFun DEV-14155
€30.16 -50%
€15.08
€12.26 tax excl.
Available
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: SparkFun

Description

Board forESP32 Thingmodule that allows you to control devices with current up to 5 A and voltage from 5 V to 28 V, for example, long LED strips.

    

The product is compatible with Arduino.

Auser manualwith examples for Arduino.

The heart of the system are the three controllers of MC33926 motors which can switch devices up to 30 A, however, they have only been tested on values up to 10 A on 6 output pins. The system has 3 current sensors connected to the outputs - 2, 4 and 6. Each of them is connected to the LMV358 amplifier to adjust the measurements' booster. To increase the sensitivity of the converter for currents smaller than 5 A, you must remove the jumper and solder the appropriate resistor. Details inthe user guide.

The module has soldered DC connector and screw connectors.

The subject of the sale is the control board.ESP32 Thing module must be purchased separately.

Power

The device can be powered in two ways:

  • Via DC connector: with maximum current of 2.5 A, designed for small loads
  • Via screw ARK connectors: with maximum current of 6 A, is designed for large loads

 

Voltage to 5.0 V
Voltage from 28.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller ESP32
UC - core 1. Single Core
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

AS7263 NIR - Visible Light Spectrum Sensor - SparkFun SEN-14351

The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light and NIR (near infrared light) that allows you to measure and describe how various...
Index: SPF-10121
Index: SPF-10121
Available
Check quantity
Regular price €38.84 Price €38.84

AS7262 - Visible spectrum sensor - SparkFun SEN-14347

The module is equipped with a sensor of  spectrum, i.e. the spectrum of visible light , allows you to measure and to characterize how different materials absorb and reflect...
Index: SPF-10119
Index: SPF-10119
Available
Check quantity
Regular price €30.16 Price €30.16

DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n

The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
Available
Check quantity
Regular price €56.20 Price €56.20

Servo Feetech FS90R - micro - continuous work 360 degrees

Feetech FS90R v2 micro servo. Operates as a variable speed motor. Powered from 4.8 V. Speed: 0.07 s/60°. Torque: 1.5 kg*cm. Dimensions: 30.5 x 12 x 22 mm....
Index: FTC-04689
Index: FTC-04689
Available
Check quantity
Regular price €5.84 Price €5.84

Universal holder for Arduino and for breadboard - SparkFun DEV-11235

Black Arduino mounting base and contact plate 400 holes. The module has mounting holes for Arduino Uno, Leonardo and derivatives.
Index: SPF-02674
Index: SPF-02674
Delivery scheduled for 2022-08-31
Regular price €3.67 Price €3.67

Stand for Raspberry Pi and contact plate + contact plate 400 fields

Plastic pad that allows you to set the Raspberry Pi and the breadboard with 400 holes in the set.
Index: GRL-12121
Index: GRL-12121
Available
Check quantity
Regular price €2.76 Price €2.76

Set of 140 wires for breadboards

A kit of 140 wires of different length, to connect the fields on the breadboards (test).
Index: KAB-00678
Index: KAB-00678
Available
Check quantity
Regular price €2.37 Price €2.37

ESP32 One - Mini development board with WiFi and Bluetooth - Waveshare 19188

ESP32 One development board powered by ESP32-D0WDQ6-V3 . It supports WiFi 802.11 b/g/n and Bluetooth BLE4.2 wireless communications and can be powered by USB or 4.2 V...
Index: WSR-19191
Index: WSR-19191
Available
Check quantity
Regular price €16.49 Price €16.49

HiFiBerry Amp2 amplifier of class D 60 W for Raspberry Pi 4B/3B+/3B/2/B+/A+

Cap type Hat for Raspberry version 4B, 3B+, 3B, 2B, A+, B with a built-in class D amplifier with power of 60 W. The device supports speakers with an impedance of 4 Ω to 8 Ω,...
Index: RHF-09886
Index: RHF-09886
Available
Check quantity
Regular price €70.53 Price €70.53

M5Atom Echo - Programmable speaker - ESP32

Programmable loudspeaker based on M5Atom module, the ESP32 controller is responsible for its operation. The device is equipped with Bluetooth wireless communication module,...
Index: MSS-17964
Index: MSS-17964
Available
Check quantity
Regular price €18.01 Price €18.01

MP34DT01-M - PDM MEMS microphone - Adafruit 3492

MEMS microphone based on PDM (Pulse Density Modulation) signal. It has a built-in MP34DT01-M module and communication is via I2S interface. The signal to noise ratio SNR is...
Index: ADA-18668
Index: ADA-18668
Available
Check quantity
Regular price €7.36 Price €7.36

PDM Microphone Unit - Unit expansion module for development modules M5Stack

MEMS digital microphone based on PDM signal. Unit type module dedicated for M5Stack products. It has radio frequency interference, high signal-to-noise ratio and high...
Index: MSS-18037
Index: MSS-18037
Available
Check quantity
Regular price €5.19 Price €5.19

Products from the same category

MicroView - USB programmer - SparkFun DEV-12924

USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...
Index: SPF-03070
Index: SPF-03070
Available
Check quantity
Regular price €20.16 Price €20.16

Pro Micro - 5V/16MHz - Atmega32u4 module - SparkFun DEV-12640

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01594
Index: SPF-01594
Available
Check quantity
Regular price €21.68 Price €21.68

ESP32 Thing - Wi-Fi module and Bluetooth BLE - compatible with the Arduino IDE- SparkFun DEV-13907

The module provides communication with wi-fi and Bluetooth BLE, compatible with the Arduino IDE. It has ESP32 system with 520 KB of RAM and 4 MB of Flash memory, 28 GPIO pins,...
Index: SPF-07911
Index: SPF-07911
Available
Check quantity
Regular price €27.99 Price €27.99

SparkFun Thing Plus - ESP32-S2 WROOM - SparkFun WRL-17743

A small module equipped with ESP32-S2 WROOM microcontroller with Xtensa LX7 32-bit microprocessor clocked at 240 MHz , which enables WiFi wireless communication. It is...
Index: SPF-19506
Index: SPF-19506
Available
Check quantity
Regular price €30.36 Price €30.36

SparkFun RedBoard Artemis Nano - microcontroller board - SparkFun DEV-15443

The RedBoard Artemis Nano is a minimal board from SparkFun featuring the Sparkfun Artemis Bluetooth 5.0 module. The board is designed to be compatible with the Arduino Nano...
Index: SPF-19854
Index: SPF-19854
Available
Check quantity
Regular price €21.68 Price €21.68

Teensy LC ARM Cortex M0+ - compatible with Arduino - SparkFun DEV-13305

The module has small size and great potential. It is equipped with a 32-bit microcontroller with the core ARM Cortex M0+ 48 MHz, 62 KB of Flash, 8 KB of RAM. It has 27 pins of...
Index: SPF-06859
Index: SPF-06859
Available
Check quantity
Regular price €21.68 Price €21.68

SparkFun Thing Plus - ESP32 WROOM (U.FL) - module with WiFi and Bluetooth - SparkFun WRL-17381

The module produced by SparkFun and equipped with the ESP32 WROOM system, with the possibility of wireless WiFi and Bluetooth communication. SparkFun Thing Plus has a...
Index: SPF-21149
Index: SPF-21149
Available
Check quantity
Regular price €30.16 Price €30.16

SparkFun Thing Plus - STM32 - SparkFun DEV-17712

The SparkFun Thing Plus board is equipped with an STM32F405 microcontroller with a 32-bit ARM Cortex-M4 core with FPU clock frequency up to 168 MHz. It has SPI Flash memory,...
Index: SPF-21150
Index: SPF-21150
Available
Check quantity
Regular price €38.84 Price €38.84

Arduino Shield Adapter for Teensy - SparkFun KIT-15716

Adapter that allows you to connect to the Teensy module dedicated covers for Arduino without using a contact plate and cables. The adapter is sold as a self-soldering kit.
Index: SPF-16459
Index: SPF-16459
Available
Check quantity
Regular price €14.30 Price €14.30

SparkFun RedBoard Plus - development board compatible with Arduino

SparkFun RedBoard Plus is another Arduino compatible development board that has been produced by SparkFun. The module is fully compatible with Arduino Uno, featuring...
Index: SPF-19964
Index: SPF-19964
Available
Check quantity
Regular price €21.48 Price €21.48

SparkFun BlackBoard C - ATmega328P - compatible with Arduino Uno - SparkFun SPX-16282

BlackBoard C is a module manufactured by SparkFun, which is fully compatible with Arduino Uno . It was equipped with an ATmega328P microcontroller with Optiboot (UNO)...
Index: SPF-20621
Index: SPF-20621
Available
Check quantity
Regular price €25.82 Price €25.82

Pro Micro - 3.3V/8MHz - Atmega32u4 module - SparkFun DEV-12587

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01592
Index: SPF-01592
Available
Check quantity
Regular price €23.85 Price €23.85