- New
Product description: SMLIGHT SLZB-07p10 - ZigBee gateway CC2674P10 EFR32 for Home Assistant - USB interface
The SLZB-07p10 is a small, powerful ZigBee USB adapter designed for managing smart home networks using the Home Assistant system. The device utilizes the modern CC2674P10 chip from Texas Instruments, which offers larger memory resources, a newer ARM Cortex-M33 architecture, and advanced security features compared to the earlier CC2652 series chips. The adapter supports ZigBee2MQTT and ZHA , and by default, acts as a ZigBee coordinator when connected to a USB port. With a 20 dB amplifier, a 3 dB rotatable antenna , and a compact design, it's well-suited for both simple home installations and more complex automation systems.
SMLIGHT SLZB-07p10 - ZigBee gateway CC2674P10 EFR32 for Home Assistant - USB interface.
Pre-loaded software allows you to quickly start configuring your system.
Main features of the SLZB-07p10 ZigBee gateway
- CC2674P10 Chip : Texas Instruments' modern SoC with Cortex-M33 architecture, larger memory, and security features
- ZigBee 3.0 support : stable communication with Smart Home devices from various manufacturers
- Home Assistant compatibility : works with Zigbee2MQTT and ZHA when connected via USB
- Thread/Matter support : possible after installing the appropriate firmware, without simultaneous operation in ZigBee and Thread modes
- ZigBee coordinator mode : default operation immediately after connecting to the USB port
- ZigBee router mode : ability to work as a ZigBee network repeater after changing the firmware
- 20 dB signal amplifier : greater communication range in smart home installations
- 3 dB Antenna : Rotatable external antenna for improved connection stability
- Unlocked bootloader : ready for programming and changing firmware according to the selected operating mode
- Support for up to 400 devices : high scalability of ZigBee networks compared to basic USB adapters
- OTA updates : remote software update capability
- Compact design : one of the smallest USB adapters with an external antenna based on CC2674P10
ZigBee - stable communication for Smart Home
ZigBee is an energy-efficient wireless communication standard that allows you to connect smart home devices into a single, cohesive network. In practice, it enables the integration of motion sensors , temperature sensors, sockets, switches, relay modules, blind controllers, lighting, and many other devices from various manufacturers . The SLZB-07p10 adapter acts as a ZigBee coordinator, the central point of communication between ZigBee devices and the Home Assistant system . Thanks to Zigbee2MQTT and ZHA support, you can choose your preferred integration method and gradually expand your Smart Home installation.
The antenna improves the stability of the connection with sensors, relays, lighting and other devices.
USB connectivity ensures ease of use.
Technical specifications of the ZigBee gateway
- Main ZigBee Chip: Texas Instruments CC2674P10
- Processor architecture: ARM Cortex-M33
- Flash memory: 1024 kB
- SRAM memory: 256 kB
- Serial Chip: CP2102N
- Built-in converter: USB/UART
- Communication interface: USB
- Communication standard: ZigBee 3.0
- Home Assistant support: yes
- Zigbee2MQTT support: yes
- ZHA support: yes
- Maximum number of connected end devices: up to 400
- Default operating mode: ZigBee coordinator
- ZigBee router mode: yes, after firmware change
- Thread/Matter support: yes, after firmware update
- Simultaneous operation of ZigBee and Thread: no
- SoC ZigBee output gain: 20 dB
- Antenna gain: 3 dB
- Antenna type: external, rotatable
- Bootloader: unlocked
- Programming ready: yes
- OTA updates: yes
Contents of the set
- ZigBee Adapter SLZB-07p10
- 3 dB external antenna
| Comparison of models from the SLZB-07 series | ||||
|---|---|---|---|---|
| Model | SLZB-07 | SLZB-07P7 | SLZB-07P10 | SLZB-07MG24 |
| SoC ZigBee/Thread | EFR32MG21 | CC2652P7 | CC2674P10 | EFR32MG24 |
| SoC Manufacturer | Silicon Labs | Texas Instruments | Texas Instruments | Silicon Labs |
| Max connected devices | up to 200 | up to 250 | up to 400 | up to 350 |
| The best choice for | ZHA | Zigbee2MQTT | Zigbee2MQTT | ZHA / Thread |
| Good compatibility with | Zigbee2MQTT | ZHA | ZHA | Zigbee2MQTT |
| ZigBee support | Yes, native ZigBee support on all models | |||
| Thread Support | Yes, native Thread support on all models | |||
| Multiprotocol | Yes | NO | NO | Yes |
| Attention | Multiprotocol mode is not recommended by Home Assistant | |||
Useful links |
