- Reduced price
Product description: Filament Rosa3D Flex 96A 1.75 mm 0.5 kg - Gray
Gray filament from Rosa3D, wound on a spool, has a weight of 0.5 kg and a diameter of 1.75 mm . The material is characterized by exceptional chemical resistance . Flex 96A has high adhesion between layers , which guarantees very good print quality. In addition, it is resistant to stretching , and when subjected to compression and crushing, it retains its original shape. The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from third-party suppliers.
Filament Rosa3D Flex 96A 1.75 mm 0.5 kg - Gray.
Flex 96A is resistant to repeated compression and stretching - it returns to its original shape.
Properties of the Flex 96A filament
- Resistant to chemical agents and mechanical damage
- It has high interlayer adhesion - allows you to obtain high quality prints
- Resistant to repeated compression and stretching - returns to its original shape
- Odorless
Using the Flex 96A filament
- Gaskets, bumpers, dampers/anti-gravity feet
- Cases for smartphones and device construction
- Drone components
- Elements for RC cars
Suggested filament printing parameters
| printing temperature | from 210°C to 250°C |
| table temperature | from 50°C to 70°C |
| Print cooling | Recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the Rosa3D-Flex 88A 1.75 mm 0.5 kg filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Color | gray |
| Material | Flex 96A |
| head temperature | from 210°C to 250°C |
| table temperature | from 50°C to 70°C |
| net weight | 0.5 kg |
