Description: Devil Design PETG 1,75 mm 1 kg - Galaxy Green
PETG filament from Devil Design in Galaxy Green colour - green with glitter admixture. Material is compatible with 3D printers, which do not have protection against the use of third-party inserts. The product can also be used with open source devices. Filament made of thermoplastic polymer requires the use of heated table and print cooling. The subject of sale is the felt with a diameter of 1 .75 mm and a net weight of 1 kg.
In our offer of filaments you will also find other materials and colors.
Devil Design PETG 1,75 mm 1 kg - Galaxy Green.
PETG feltadvantages
- Odorless and non-toxic during printing
- Highly flexible
- Waterproof
- Low material shrinkage
- Glossy surface
- Resistant to abrasion and mechanical damage
Suggested parameters for printing with felt
| Printing temperature | From 220°C to 250°C |
| Table temperature | 70°C to 80°C |
| Print cooling | Recommended |
|
Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | Galaxy Green |
| Printing temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Material | PETG |
| Spool diameter | 200 mm |
| Spool width | 70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Carton |
| Moisture absorber | Yes |
| Vacuum packaging | No |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 205 x 205 x 80 mm |
| Net weight | 1 kg |
