An AVR programmer ISP USBasp compatible + ribbon IDC - red
An AVR programmer ISP USBasp compatible + ribbon IDC - red - zdjęcie 1
 - zdjęcie 2
 - zdjęcie 3
 - zdjęcie 4
 - zdjęcie 5

Programmer AVR compatible with USBasp ISP + IDC tape - red

Index: MOD-10791 EAN: 5904422337506

The programmer AVR USBasp is fully compatible with the programmer to "USBasp" created by Thomas Fischl. It can be used to program microcontrollers of the ATMEL AVR family via the USB port on the PC.

€9.88
€8.03 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Specification
  • The programmer has a polymer fuse (500 mA, reusable) securing the USB port of the computer
  • The device allows you to power circuits wth voltage 5V
  • Requires additional USB cable
  • Programming speed reaches 5kB/s
  • Works with the following operating systems: Windows XP, Windows Vista, Windows 7, Windows 8, Linux
  • The programmer is easy to use, and two LEDs (red and green) allow to monitor the device status
  • Has three jumper configuration

To start the work with the programmer you just need to install drivers. A detailed description of installation and operation is the user's guide.

The device can be used for programming modules Arduino Uno and Leonardo, if necessary install a new bootloader. To easily connect the boards there is also a very handy adapter ISP type KANDA.

Included
  • The programmer is compatible with USBasp (shown in the photo above)
  • IDC tape 50 cm long, with corresponding ferrules for connectors of the KANDA type
  • 2 jumpers to configure the programmer
 

 

Description

The programmer AVR USBasp is fully compatible with the programmer to "USBasp" created by Thomas Fischl. It can be used to program microcontrollers of the ATMEL AVR family via the USB port on the PC. USBasp supports many popular environments for developing software and applications designed for downloading programs, including: Bascom, AVRDude, WinAVR, and many others.

        Programator zgodny z USBasp do mikrokontrolerów z rodziny AVR
Jumper

J1 - Service - link for the software update (should be removed during normal operation)
J2 - Slow SCK jumper to slow down the frequency programming of the target system
J3 - Supply target - Assembled jumper J3 powers up the system timer from the USB port (5V approx.)

Supported microcontrollers

  • ATmega8, ATmega88, ATmega8515, ATmega8535, ATmega128, ATmega1280, ATmega1281, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega103, ATmega32, ATmega324, ATmega329, ATmega3290, ATmega48, ATmega64, ATmega640, ATmega644, ATmega649, ATmega6490
  • ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny45, ATtiny84, ATtiny85
  • AT90S2313, AT90S2333, AT90S1200, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90CAN32, AT90CAN64, AT90CAN128

 

Supported environments

  • Bascom AVR
  • AVRDude
  • WinAVR
  • other

 



Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
Delivery scheduled for 2022-01-21
Regular price €3.28 Price €3.28

AVR microcontroller - ATmega8A-AU SMD

Atmel microcontroller AVR with 32-led case soldered on surface - SMD. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 bytes of...
Index: UCC-00079
Index: UCC-00079
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

AVR microcontroller - ATmega16A-AU SMD

Popular AVR microcontroller from ATmel in a case soldered on surface (SMD).
Index: UCC-00080
Index: UCC-00080
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.48 Price €5.48

AVR microcontroller - ATmega16A-PU - DIP

Popular microcontroller AVR from Atmel in a DIP case.
Index: UCC-00115
Index: UCC-00115
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.14 Price €6.14

AVR microcontroller - ATmega128A-AU SMD

Popular microcontroller ATmega128a-AU from ATmel AVR family in a case soldered on surface (SMD).
Index: UCC-00156
Index: UCC-00156
Delivery scheduled for 2022-02-04
Regular price €10.98 Price €10.98

AVR microcontroller - ATmega32A-PU - DIP

Popular microcontroller AVR from ATmel in a case DIP40.
Index: UCC-00159
Index: UCC-00159
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

AVR microcontroller - ATmega32A-AU SMD

Popular microcontroller AVR from ATmel in a case soldered on surface (SMD).
Index: UCC-00160
Index: UCC-00160
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

ATmega8 mini module - microBOARD-M8

Module microBOARD-M8-miniature set of run with the host microcontroller ATmega8A.
Index: MOD-00970
Index: MOD-00970
Delivery scheduled for 2022-01-21
Regular price €6.58 Price €6.58

Customers who bought this product also bought:

Test kit, electronic component tester - M12864 KIT

The set for testing and the recognition of electronic components such as bipolar transistors PNP, NPN, MOSFET transistors with channel P and N, field transistors JFET and LEDs....
Index: MOD-05056
Index: MOD-05056
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.18 Price €26.18

Philips LongLife Battery 6LF61 9V

Philips LongLife 6F22 alkaline battery of nominal voltage 9 V and dimensions 25,5 x 16,5 x 47,5 mm . It is designed to power equipment with low power consumption.
Index: BAT-03428
Index: BAT-03428
Unavailable
Regular price €0.77 Price €0.77
  • EOL

Soldering tin Cynel LC60 100g/1,00mm

Soldering tin with flux with a diameter of 1.00 mm and reel weight of 100 gr.
Index: NSZ-00467
Index: NSZ-00467
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.94 Price €5.94

Stand for DIP28 narrow - 5pcs

Stand for chip DIP 28. Price for 5 pieces.  
Index: UCC-00090
Index: UCC-00090
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.26 Price €0.26

ARK connector raster 3,5mm 2 pin (+) - 5pcs

Screw, clamp, 2-pin conector. Pitch of 3.5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Price for 5 pcs of conectors.
Index: KAB-02554
Index: KAB-02554
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.21 Price €1.21

IR transmitter SFH 203 - 5mm 850nm

Led IR transmitter in a threaded case THT 5 mm. Wavelength-850 nm. Lens transparent.
Index: LED-10739
Index: LED-10739
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.64 Price €0.64

Connector IDC10 for the contact plate

Connector allows for connecting the IDC10 ribbon for standard beadboards (prototype) with the pitch of 2.54 mm.
Index: MOD-01745
Index: MOD-01745
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.08 Price €1.08

DC connector 5,5x2,1mm for printing - horizontal

Power DC φ5.5 x 2.1 mm slot for printing, made of plastic.  Items are sold in sets of 10 pieces.
Index: KAB-00411
Index: KAB-00411
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.88 Price €0.88

Power supply 5V/2,5A - DC plug 5,5/2,1mm

Stabilized mains power supply. Power supply: 110 - 240 V. Output voltage: 5 V DC. Output current: 2.5 A.
Index: ZAS-01364
Index: ZAS-01364
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.06 Price €3.06

Wheel + DC Motor 65x26mm 5V with 48:1 Gear

Wheel with a tyre diameter of 65 mm and a width of 26 mm, with motor powered with voltage of 5 V with a current consumption of approx. 180 mA. The engine has a gear 48:1,...
Index: MOT-03696
Index: MOT-03696
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.74 Price €1.74

Chassis Rectangle 2WD 2-wheel robot chassis with DC Motor Drive

Transparent, universal platform, allowing you to build a robot, for example, to track a line (line follower) or fighting (sumo). For control, you can use any controller,...
Index: ROB-07283
Index: ROB-07283
Delivery scheduled for 2022-01-27
Regular price €7.26 Price €7.26

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V. Average current per channel 600 mA (momentary up to 1.2 A). Housing: DIP 16 (through-hole). Set contains 5 pcs of chips.
Index: UCC-00176
Index: UCC-00176
Available, 24 hours shipping!
(Check quantity)
Regular price €8.78 Price €8.78

Products from the same category

Kanda ISP 6 PIN adapter - ISP 10 PIN

Adapter for programming connector Kanda ISP 10 pin to ISP 6 pin. The module facilitates programming of sets with mikrocontrollers Atmel with dertived connectors of different...
Index: MOD-01688
Index: MOD-01688
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.64 Price €0.64

Particle - Debugger - programmer USB-JTAG for Particle

Debugger enables programming of the Particle modules via popular interfaces such as JTAG and SWD using open source tools, such as GDB.
Index: PRE-13653
Index: PRE-13653
Waiting for confirmation of delivery date
Regular price €27.72 Price €27.72

MicroView - USB programmer - SparkFun DEV-12924

USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...
Index: SPF-03070
Index: SPF-03070
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.38 Price €17.38

DFrobot eClip - module tester/programmer AVR/Arduino

Tool for programming and testing small circuits that support ICSP or FTDI serial connection. It has pogo pins in 2 × 4 configuration. Kit for self-assembly.
Index: DFR-04576
Index: DFR-04576
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.44 Price €9.44

Programmer AVR ProgUSB MKII ECO v2.1 + IDC tape

Programmer AVR MKII is fully compatible with the system AVRISP-MKII. It can be used to program all microcontrollers from the AVR family with ISP interface. The module is...
Index: MOD-07246
Index: MOD-07246
Brak potwierdzonego terminu
Regular price €13.18 Price €13.18

MPLAB PICkit 4 - debugger / programmer for PIC microcontrollers

Debugger / programmer for quick and easy debugging of PIC and dsPIC microcontrollers, using a sophisticated graphical user interface integrated development environment MPLAB....
Index: FAR-12833
Index: FAR-12833
Waiting for confirmation of delivery date
Regular price €91.30 Price €91.30

STLINK-V3SET - In-circuit debugger / programmer

Programmer / debugger ST-Link/v3set. Supports Flash programming type drag and drop.
Index: DIS-14282
Index: DIS-14282
Waiting for confirmation of delivery date
Regular price €43.78 Price €43.78

AVR 2 programmer compatible with USBasp ISP

Programmer AVR USBasp 2 is fully compatible with the USBasp programmer. It can be used to program microcontrollers from the AVR family via the USB port. Version 2 has two...
Index: MOD-01317
Index: MOD-01317
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.64 Price €11.64

Bus Pirate v3.6a - SparkFun TOL-12942

The device allows you to connect the computer with electronic modules, using the popular data transfer protocols, e.g. SPI, I2C, UART. It improves the process of communication...
Index: SPF-01707
Index: SPF-01707
Waiting for confirmation of delivery date
Regular price €34.98 Price €34.98

USB programmer and debugger for Xilinx devices - Waveshare 6530

A platform that allows you to program and debug Xilinx devices via USB. The device is based on CY7C68013A+FPGA chip, which is compatible with original Xilinx platforms. It...
Index: WSR-16398
Index: WSR-16398
Delivery scheduled for 2022-01-25
Regular price €42.90 Price €42.90

Programmer/debugger STM8/STM32 compatible with ST-LINK/V2 mini - Waveshare 10053

The device is used as the programmer and debugger for STM8 and STM32 modules. It works with voltages 3.3 V and 5 V, selectable by jumper.
Index: WSR-04481
Index: WSR-04481
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.58 Price €19.58

Arduino ISP A000092 - programmer for Arduino

System with programmer suited to ICSP Arduino connectors. It allows you to upload software and burn the bootloader via the built-in microUSB slot.
Index: ARD-04793
Index: ARD-04793
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.04 Price €18.04