- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Original Prusa SL1 with CW1 Prusa CW1 print hardening washer
Original 3D printer byPrusa. The device usesMSLA technology, curingthe resin by means of LCD and UVLEDpanel.Prusa SL1 allows to create very detailed prints with a maximum size of 120 x 68 x 150 mm. The setincludesa Prusa CW1 print hardener.
| The offer also includes a Prusa SL1 printerwithout the Prusa CW1 device. |
Presentation of the Prussia SL1 model.
Extremely detailed prints
The resin-curingLCD screenis 5.5inches in size andhasa resolution of 2560 x 1440 pixels.In this configuration, the size of a single pixel is only0.047 mm, which is also a constant value ofthe resolution of the X and Y axes.
High level of detail reproduction of Prussian SL1 printouts.
In SL1 manufacturer used the latest Trinamic drivers.They are characterized by extremely quiet operation. They also enable to obtain significant more precise prints.
| The minimum layer height that can be achieved by Prusa SL1 is 0.01 mm. However, the manufacturer recommends that the working values of this parameter should be in the range 0.025 - 0.1 mm. |
Process of creating a 3D model in MSLA technology.
Active resin container
The innovative design of the resin tank allows it tochange its position angle.After the next layer is applied, the printout is not lifted vertically above the bottom of the tank. This makesresinmixingmore efficient. This solution also makes it easier to create larger surface layers and increases the speed ofoperation.
Mobile resin tank in Prusa SL1.
Print speed and working area Prusa SL1
The device'sworkspaceallows you to create objects with a maximum size of 120 x 68 x 150 mm. Apowerful UV lampfixes a singlelayer ofresinin just 6 seconds,so the SL1PrussianSL1 allows you to printlargemodels in a short time.
Prusa SL1 working area.
FEP film protecting the bottom of the resin tank
Located at the bottom of the resin containerFEP filmis a transparent and durable material. It ensures that the tank is tight. The manufacturer has also made it possible to easilyreplace thiselement in case of damage.
FEP film on the bottom of the resin tank.
Simple Prussia SL1 calibration process
The use of theballjoint,as an element connecting the printing platform with the arm enabling its vertical movement, made it possible tosimplify the calibration of the PrusaSL1printer. This process comes down to loosening the fastening screw and running the appropriate command from the device menu.
Automatic calibration function in Prusa SL1.
Stable, aluminium construction of the printer
The SL1 Prussian SL1 has a reinforcedconstruction made ofhigh qualityaluminium,which provides the device withstabilityduring printing. The printer also has a separate, lockable cover.
Aluminium elements of Prusa SL1 construction.
Precise resin quantity sensor
The placement of a precise resin level sensorinside the tank allowsto select theright amount of material for printingmore precisely.By sending information about the ending resin, the sensor also avoids unexpected printing interruptions.
Resin sensor in Prusa SL1 is located inside the container for printing material.
Advanced fume extraction system
The SL1 Prusa SL1 3D printer has a specially designed cooling and vapour extraction system. Theprintercover prevents unwanted substances from penetrating the work area. The air flow and cooling of the device is ensured byan efficient fan equipped with a high quality filter.
Efficient fan with filter used in SL1.
Touch menu and connection of external devices
The control of Prusa SL1 is performed by means of a touchLCD displayplaced on the front of the device. The printer can connect to the computer via LANorWi-Fi.It is also equipped with aUSBport.
Menu Prussia SL1.
The printer software allows you to view the progress of work with a smartphone. The printer firmware can be updated via OTA. The manufacturer also provides its own program for preparing printouts - PrusaSlicer.
New version of the proprietary PrusaSlicer program.
Device for curing and cleaning prints Prusa CW1
Prusa CW1 is a separate, multifunctional device forcuringandcleaning prints.It is dedicated to work with Prusa SL1 printers.
Prusa CW1 Prusa CW1 hardening washer.
Washing and drying of prints
The function ofwashingthe finished model allows to remove the remains of uncured resin from it. Prusa CW1 uses isopropyl alcohol and magnetic stirrer located in a stainless steel container. Thoroughdrying ofthe printout avoids resin stains that may arise during curing.
Prusa CW1 washing and drying function.
Printout curing
This is a key function, used at the last stage of work with the printout. Models made of resin, immediately after printing, have quite unstable consistency. Exposing them toUV light enables their hardening and gives them the expected properties. Prusa CW1 uses 4 LED tapes to harden models.
Drying of prints allows to give them expected properties.
Easy handling Prusa CW1
The device has a built-inIR sensorto check that the isopropyl alcohol container is in theright place. Theclear menu layoutmakes it easy to select the next options displayed by Prusa CW1.
Menu Prusa CW1.
Specification Prusa SL1
| Technical Specification | |
|---|---|
| Printing method: |
LCD and UV LED |
| LCD display: | 5,5" |
| Display resolution: | 2560 x 1440 pixels |
| Print speed: | 6 seconds per layer |
| Minimum layer height: | 0.01 mm |
| Recommended layer height: | 0,025 - 0,1 mm |
| XY resolution: |
47 um |
| LED power supply: |
25 W |
| The operating system: | Windows |
| The language: | English |
| Connection: | USB, Wi-Fi, LAN |
| Printing material: | UV resin 405 nm |
| The casing: | Aluminium and plastic |
| A light source: | UV LED 405 nm |
| Print size: |
120 x 68 x 150 mm |
| Printer dimensions: | 400 x 237 x 225 mm |
Prussia CW1 specification
| Technical Specification | |
|---|---|
| Power supply voltage: | 100 V to 240 V AC |
| The power of the device: | 130 W |
| LED UV wavelength: |
405 nm |
| Maximum UV LED power: | 52,8 W |
| EEE Group: | 3 |
| Operating temperature range: | from 16°Cto 38°C |
| Ambient humidity: | up to 85% |
| Dimensions of the device: |
218 x 345 x 232 mm |
Contents of the Prusa SL1 set with the Prusa CW1 washer
- Print curing and cleaning device Prusa CW1
- Prusa SL1 printer and the following accessories:
- Flash drive
- Resin funnel
- Spatula for easy tearing off the printout
- Allen wrenches
- Resin 500 ml
- Protective glove
CW1 Prussian print curing washer.
Accessories included in the 3D printer Prusa SL1.
| 500 ml of resin is included in the printer kit. |
Useful links |
