- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey X86J4105864 - Intel Celeron J4105+ATSAMD21 8GB RAM 64GB eMMC WiFi+Bluetooth - Windows 10 - Seeedstudio 102110397.
Odyssey X86J4105864minicomputer equipped with2.5 GHz Intel Celeron J4105 Quad-Core 2.5 GHzprocessor withIntel UHD Graphic 600andATSAMD21 Cortex M0 coprocessor. It has8 GB of RAMand64 GB eMMCwithWindows 10 Enterpriseenabled. On board is a dual bandWiFimodule andBluetooth 5.0. The board is equipped with two Gigabit Ethernet connectors, three USB ports (2x USB 2.0 and 1x USB 3.0), audio inputs/outputs,USB type C connector for power supply, HDMI and SATA slot, as well as PCI-e. Additionally it has amicroSD andSIMcard slot.On the bottom of the boardthere is a largeheat sink with a fan, whichensures effective cooling of the whole system.
Presentation of Odysstey X86J4105 mini-computer.
Three versions available in the offer:
|
What do you need to run the Odyssey X86J4105 minicomputer?
- A power supply:
- 12 V / 2 A - 5.5 / 2.1 mm DC jack or USB type C (power supply with DC plug included)
- HDMI orUSB Ccable- to connect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
- Connected internet - for software download
Front panel of the minicomputer.
Operating system for Odyssey
This version of the Odyssey X86J4105 minicomputer has Windows 10 Enterprise installed and activated. The system is installed on 64 GB internal eMMC memory.
A presentation of how a computer works with Windows.
Communication in Odyssey X86J4105
The minicoputer is equipped with basic communication interfaces, which are found in PCs. The user has it at his disposal:
- three USB connectors (2xUSB 2.0, 1x USB 3.0) to connect peripheral devices such as mouse and keyboard. The number of ports can be expanded with the appropriate USB HUB.
- Ethernet ports,possibility to connect to the LAN with a cable, maximum data transfer speed is 1000 Mb/s.
- GPIO 40-pin and 28-pinRaspberry Pi and Arduino compatible connectors. They can be used to connect various sensors, diodes,motorcontrollers. They include such interfaces as: I2C, SPI, UART.
- MicroSD / SIM / SATA / PCI-e slots,allow you to place a SIM card for communication in 4G network (with optional overlay), microSD card,SSD or M.2 drive as a memory carrier.
Connectors layout on the Odyssey X86J4105 board.
Minicomputer power supply
Odyssey has two power connectors:USB CandDC 5.5 / 2.1 mm. The USBCconnector supports the Power Delivery function, the power supply voltage should be 12 V and thecurrent capacitymin.2 A.In the case of power supply through the DC connector, the supply voltage should bebetween 12 V and 19 V, and the current capacity of the power supply should be at least 2 A. A 12 V / 2 A power supply unit with 5.5 / 2.1 mm DC plug and replaceable caps is included.
Rear minicomputer panel including microSD/SIM card slot as well as USB 3.0, USB C and mini jack.
Specification and comparison of Odyssey X86J4105 minicomputers
Technical Specification | ||||
---|---|---|---|---|
Model | Odyssey X86J4105800 - 102110399 | Odyssey X86J4105864 - 102110397 | Odyssey X86J4105864 - 102110398 | |
Basic information | ||||
Processor |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
|
Coprocessor | ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
|
Graphics |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
|
Memory RAM | LPDDR4 8 GB | LPDDR4 8 GB | LPDDR4 8 GB | |
Internal memory | No | eMMC 64 GB | eMMC 64 GB | |
Operating system | Windows, Linux | Windows, Linux | Windows 10 Enterprise activated | |
Wireless communication | WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
|
Network | Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
|
Dimensions | 110 x 110 mm | 110 x 110 mm | 110 x 110 mm | |
Interfaces | ||||
Audio |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
|
Connections |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 connectors 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
|
USB |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
|
Video |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
|
Extension slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
|
RTC | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | |
TPM | Built-in TPM (2.0) | Built-in TPM (2.0) | Built-in TPM (2.0) | |
Power supply | DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
The set includes
- Minicomputer Odyssey X86J4105864 with Windows 10 Enterprise enabled
- WiFI + Bluetooth antenna and 5 GHz WiFi antenna
- SATA adapter
- RTC
- 5.5 / 2.1 mm DC power supply
Useful links |