Power supply module from the DDRV network source - g-SPS 1.02 for c-uGSM and d-u3G

Index: MOD-05174 EAN: 5904422363208

The powering module and voltage converter for modules of c-uGSM and d-u3G to use with the AC power supply. Input voltage ranges from 5 V to 16 V. The output voltage is 4 V with the maximum current of up to 600 mA.

Power supply module from the DDRV network source - g-SPS 1.02 for c-uGSM and d-u3G
€4.90
€3.98 tax excl.
Waiting time: 2-4 weeks
Only on request
PayPal payment
Manufacturer: Itbrain Power

Description

Powering module for c-uGSMandd-u3G systems which also provides conversion of logical signals. On the board is a place for soldering the DC connector (sold seperately). The system accepts the supply voltage from5 V to 16 V. The output voltage is 4 V with the voltage of 600 mA(temporary up to 2 A). Board sizes are35 x 21 mm.

Pins

The pins were divided to a part connected to the main microcontroller and to the part connected to the GSM module.

 

 

Pin of the part connected with the microcontroller

Description
SLP Sleap input activated by the high status - details inthe documentationof the GSM module.
CTS Input Clear to Send - details inthe documentationof the GSM module.
RTS Output Ready to Send - details inthe documentationof the GSM module.
STATUS The status pin.
RI The output Ring Indicator - details indocumentation.
GROUND The ground of the system.
Vmain Power supply input from 5 V to 16 V.
Vout Additional adjustable output of 4 V.
DIS The input disabling the regulator, is activated by the high status.
ON/OFF The control of the supply voltage of the microcontoller's part (On/Off).
RESET Reset of themicrocontoller's part.
TX Communication via the serial interface.
RX Communication via the serial interface.

 

 

 

Pin of the part connected with the GSM module

Description
SLP Sleap input activated by the high status - details inthe documentationof the GSM module.
CTS Input Clear to Send - details inthe documentationof the GSM module.
RTS Output Ready to Send - details inthe documentationof the GSM module.
STATUS The status pin.
RI The output Ring Indicator - details inthe documentationof the GSM module.
GROUND The ground of the system.
Vcc Adjustable output of 4 V to power the modules of c-uGSM or d-u3G.
Vin Not connected
Vusb Input of 5 V from the USB interface of the module c-uGSM or d-u3G.
ON/OFF Control of the supply voltage of GSM part (On/Off).
RESET Reset of GSM part.
TX Communication via the serial interface.
RX Communication via the serial interface.

 

Package width 3 cm
Package height 1.2 cm
Package depth 4 cm
Package weight 0.005 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: