Orange Pi Zero Plus2 - H5 Quad-Core 512MB RAM

Index: ORN-08968

Orange Pi Zero Plus2 minicomputer with powerful H5 quad-core ARM Cortex-A53 processor. The board has 512 MB DDR3 RAM, 8 GB eMMC Flash, WiFi, Bluetooth, HDMI port, 1x microUSB OTG, 26 GPIO, microSD card slot and CSI camera connector. Works with Android, Lubuntu, Debian, Raspbian.

Orange Pi Zero Plus2 - H5 Quad-Core 512MB RAM
€26.90
€21.87 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Orange Pi

Attention, the sale of the product is complete!

Orange Pi minicomputers have been withdrawn from sale due to the manufacturer's failure to provide appropriate certification. We encourage you to familiarize yourself withother devices available in our offer.

Description

Orange Pi Zero Plus2minicomputer with powerfulH5 quad-core ARM Cortex-A53processor. The board has512 MB DDR3 RAM,8 GB eMMC Flash,WiFi, Bluetooth, HDMI port, 1xmicroUSB OTG,26 GPIO,microSDcard slot andCSI cameraconnector. Works withAndroid, Lubuntu, Debian, Raspbian.


The device has 1 microUSB slot and HDMI port and many others.

What do I need to run an Orange Pi minicomputer?

Operating system

Orange Pi works with Ubuntu and Android systems and systems known from Raspberry Pi. The drive can be a microSD card with a capacity of up to 64 GB or built-in eMMC memory.

Ubuntu and Android systems can be downloaded fromthe manufacturer's website.

Installation of the system is very easy -check our manual!

Orange Pi Zero Plus2 - top view

Communication

Orange Pi has basic communication interfaces, which can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has at his disposal:

  • one microUSB OTG socket,where you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
  • WiFiand Bluetoothmodule- AP6212, for wireless communication in IEEE 802.11 b/g/n and BT 4.2 standards.
  • GPIO x 26 pin + 13 pin connector- general purpose outputs/inputs that can be used for LEDs, buttons, motor controllers. Among them there are pins supporting I2C, SPI and UART interfaces.
  • microSD slot- a slot for a microSD memory card, on which the operating system can be installed.
  • CSI slot - after connecting the camera.

Power supply .

The system uses a microUSB socket connector as its power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will findappropriate power supplies.

Specification

Basic information
Model

Orange Pi

Zero Plus2

Orange Pi

Zero 512 MB

Specification
Processor H5 H2
Core

Quad-Core

ARM Cortex A53

Quad-Core

ARM Cortex A7

Graphics

Mali450 GPU

GPU @600MHz

OpenGL ES 2.0

Mali400MP2

GPU @600MHz

OpenGL ES 2.0

Systems

Ubuntu, Debian

Android, Raspbian

Ubuntu

Android

Memory

RAM

512 MB

DDR3

512 MB

DDR3

Memory

microSD card

up to 32 GB

eMMC 8 GB

microSD card

up to 64 GB

Node

GPIO

26-pin connector

+ 13 pin

26-pin connector

+ 13 pin
Power supply

5 V / 2 A

microUSB

5 V / 2 A

microUSB
Buttons - Power

Dimensions

48x46mm 48x46mm
Interfaces
USB Host -

1 x USB 2.0

socket type A

USB OTG 1x microUSB 1x microUSB

Interface

network

0

Ethernet

10/100 Mbit/s

Module

WiFi

Embedded

AP6212

aerial

and Bluetooth

Embedded

XR819

aerial

Video

HDMI

CSI - connector

Cameras

-
Audio HDMI

microphone

Interfaces

UART, GPIO

UART, GPIO

UC - core 4. Quad Core
UC - External memory eMMC 8 GB
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface yes
UC - Linux yes
UC - Android yes
UC - Windows no
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: