|
Attention, the sale of the product is complete! Orange Pi minicomputers have been withdrawn from sale due to the manufacturer's failure to provide appropriate certification. We encourage you to familiarize yourself withother devices available in our offer. |
Description
Orange Pi mini-computer in Win Plus version with powerful AlwinnerA64 quad-core ARM Cortex-A53processor.The board has2 GB DDR3 RAM, 2MBFlash, WiFi,Bluetooth,Ethernet 1000/100Mbpsport,HDMI portandfour USB Host ports, 1xmicro USB OTG, 40GPIO,microSD cardand IR receiverconnectors. Works withUbuntu, Android, Debian and Raspbiansystems.
The device has 4 USB ports, HDMI and Ethernet port and many more.
What do I need to run an Orange Pi minicomputer?
- MicroSD memory card- the media on which the operating system will be installed.
- Power supply- with 5 V output voltage and 4.0 x 1.7 mm DC plug
- Enclosure- protects the minicomputer from external conditions
- HDMI cable - toconnect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
Additional accessoriesare also available in our shop.
Operating system
Orange Pi works with Ubuntu and Android systems and systems known from Raspberry Pi. The device can be a microSD card with a capacity of up to 64 GB.
|
Operating systems can be downloaded fromthe manufacturer's website. Installation of the system is very easy -check our manual! |
Orange Pi Win Plus - top view
Communication
Orange Pi has basic communication interfaces, which can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has at his disposal:
- four USB connectors and one microUSB OTG socket,under which you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
- Ethernet socket, i.e. the possibility of direct connection to the LAN.
- built-in WiFiand Bluetoothmodule- Raltek for wireless communication, there is also an antenna on the board.
- GPIO x 40 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART.
- microSD slot- slot for a microSD memory card, on which the operating system can be installed.
- HDMI output- allows to output video and audio signal to the monitor.
- 3.5 mm jack output- to connect headphones, speakers or analogue video.
- Built-in microphone- enables sound recording and e.g. making calls.
- CSI input- to connect a dedicated camera.
- LCD output- to connect a screen.
Power supply .
The system uses a 4.0 / 1.7 mm DC Jack connector as its power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A (the manufacturer recommends 3.0 A). In our offer you will find a dedicatedpower supply.
Specification
| Basic information | ||||
 |
 |
 |
 |
|
| Model | ||||
| Specification |
||||
| Processor | Allwinner A64 | Allwinner H3 | Allwinner H3 | Allwinner H3 |
| Core |
Quad-Core ARM Cortex A53 |
Quad-Core ARM Cortex A7 |
Quad-Core ARM Cortex A7 |
Quad-Core ARM Cortex A7 |
| Graphics |
Mali400MP2 GPU @600MHz OpenGL ES 2.0 |
Mali400MP2 GPU @600MHz OpenGL ES 2.0 |
Mali400MP2 GPU @600MHz OpenGL ES 2.0 |
Mali400MP2 GPU @600MHz OpenGL ES 2.0 |
| Systems |
Ubuntu, Debian Android, Raspbian |
Ubuntu Android |
Ubuntu Android 4.4 |
Ubuntu Android 4.4 |
|
Memory RAM |
2 GB DDR3 SDRAM |
512 MB DDR3 SDRAM |
1 GB DDR3 SDRAM |
2 GB DDR3 SDRAM |
| Memory |
2 MB Flash microSD card up to 64 GB eMMC (optional) |
microSD card up to 64 GB |
microSD card up to 64 GB +8 GB EMMC |
microSD card up to 64 GB +16 GB EMMC |
|
Node GPIO |
40-pin connector + 3 pin UART |
40-pin connector + 3 pin UART |
40-pin connector + 3 pin UART |
40-pin link
+ 3 pin UART |
| Power supply |
5 V / 2 A (3A recommended) DC Jack |
5 V / 2 A (3A recommended) DC Jack |
5 V / 2 A (3A recommended) DC Jack |
5 V / 2 A (3A recommended) DC Jack |
| Buttons |
Power Reset |
Power | Power |
Power UBoot IR input |
|
Dimensions
|
93x60mm | 69x48mm | 85x55mm | 108x67mm |
| Interfaces | ||||
| USB Host |
4 x USB 2.0 socket type A |
2 x USB 2.0 socket type A |
3 x USB 2.0 socket type A |
3 x USB 2.0 socket type A |
| USB OTG | 1x microUSB | 1x microUSB | 1x microUSB | 1x microUSB |
|
Interface network |
Ethernet 100/1000 Mbit/s |
- |
Ethernet 10/100 Mbit/s |
Ethernet 1000 Mbit/s |
|
Module WiFi |
built-in AP6212 aerial and Bluetooth 4.2 |
Embedded Realtek aerial |
Embedded Realtek aerial |
Embedded Realtek RTL8189ETV aerial |
| Video |
HDMI HMCP, HDMI CEC, HDMI 30 functions AVOUT LCD |
HDMI, HDMI CEC, CVBS |
HDMI, HDMI CEC, CVBS |
DMI,
HDMI CEC, CVBS HDMI and CVBS |
| Audio |
HDMI 3.5 mm jack microphone |
HDMI |
HDMI 3.5 mm jack microphone |
HDMI 3.5 mm jack microphone |
| Interfaces |
UART, GPIO |
UART, GPIO |
UART, GPIO |
UART, GPIO |
Useful links |
