• EOL

Maxbotix XL - MaxSonar EZ1 - ultrasonic distance sensor MB1210 - Pololu 1651

Index: PLL-11115 EAN: 5904422339791

Ultrasonic sensor operating in the range from 0 to 765 cm. It operates with a supply voltage from 3.3 V to 5 V. Output is the signal, the duration of which is proportional to the measured distance.

Maxbotix XL - MaxSonar EZ1 - ultrasonic distance sensor MB1210 - Pololu 1651
€67.90
€55.20 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Description

Ultrasonic sensor operating in the range from 0 to 765 cm. It operates with a supply voltage from 3.3 V to 5 V. Output is the signal, the duration of which is proportional to the measured distance.

wzór wiązki MB1201

An approximate pattern of beam

Specification

  • Range: 0 to 765 cm
  • Error range: above 20 cm up to 1 cm
  • Working voltage: 3.3 V to 5 V
  • Current consumption: 2,1 mA is for 3.3 V / 3,4 mA for 5 V
  • Operating frequency: 42 kHz
  • Reading frequency: 10 Hz
  • Reading distance:
    • Serial, asynchronous, TTL, reversed, 9600 bps
    • Analog, 4.9 mV / cm when a voltage is 5 V
    • The width of pulses - 58 μs/cm
  • Resolution: 1 cm over 20 cm
  • Dimensions: 2.2 x 1.98 x 2.48 cm
  • Weight: 6.1 g

      

Voltage to 3.3 V
Voltage from 5.0 V
Interface Digital I / O
Sensor - distance to 750 cm
Sensor - distance from 0 cm

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: