- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: WiFi module W600 ARM Cortex-M3 - 16GPIO, PCB antenna
W600WiFi module supporting2.4 GHzcommunication, supports802.11 b/g/nstandard. W600 chip hasARM Cortex-M3core with 1 MB of flash memory and freeRTOS kernel. W600 has built-inPCB antennaand interfaces like:I2S / I2C / SPI / GPIO.The module communicates through UART interface. It works with voltage of3,3 V.
For Arduino usersthere has beencreated a module withGrove connector, whichallows to extend Arduino's functions with communication via 2.4 GHz WiFi network.
Main features of W600 module
- Processor: ARM Cortex-M3 32-bit 80 MHz
- RAM: 288 kB
- Flash memory: 1 MB
- Supports IEEE802.11 b/g/n
- Operating frequency: 2.4 GHz to 2.4835 GHz
- Supported WiFi encryption: WMM / WMM-PS / WPA / WPA / WPA2 / WPS
- Supported network protocols: TCP / UDP / ICMP / DHCP / DNS / HTTP
- Supports Ap and Station mode
- Integrated GPIO device controller
- Supports ASCII-based AT commands (UART interface)
W600 WiFi module.
WiFi Router W600 outputs
The W600 module is equipped with such interfaces as I2S / I2C / SPI / GPIO / PWM / UART / SDIO. It uses the UART interface for communication. It works with a voltage of 3.3 V. Detailed description of the outputs can be found on the graphic below.
W600 module outputs.
W600 module specifications
- The tension of work: 3,3 V
- Processor: ARM Cortex-M3 32-bit 80 MHz
- RAM: 288 kB
- Flash memory: 1 MB
- Communication: WiFi IEEE802.11 b/g/n
- RF system impedance: 50 Ω
- Frequency range: 2.4 GHz to 2.4835 GHz
- Sensitive reception:
- 20 MHz MCS7 / -71 dBm
- 40 MHz MCS7 / -68 dBm
- 54 Mb/s / -73 dBm
- 11 Mb/s / -86 dBm
- 1 Mb/s / -95 dBm
- The speed of data transfer in the physical layer: 802.11n MCS from 0 to 7 150 Mb/s
- Modulation: DSSS, OFDM、DBPSK、DQPSK、CCK、QAM16/64
- Power output:
- IEEE802.11b, DSSS 1Mbps, POUT = +17dBm
- IEEE802.11g, OFDM 54Mbps, POUT = +10dBm
- IEEE802.11n, OFDM MCS7, POUT = +10dBm
- Interface: I2S /I2C / SPI / GPIO / PWM / UART / SDIO
- Interface speed:
- UART: max 2 Mb/s
- SPI: max. 50 Mbps
- Network type: STA / AP / AP+STA / WiFi Direct
- Verification: WEP / WPA-PSK / WPA2-PSK
- Coding: WEP64 / WEP128 / TKIP / CCMP (AES)
- WPS function
- Saving energy: PS-Poll / Standby
- Network protocols: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP
- Interface protocols: AT+
- Operating temperature: -40°C to 85°C
- Storage temperature: from -40°C to 125°C
- Operating humidity: 5% to 90%
- Dimensions: 21 x 16 mm
Useful links |
