Current sensors - Strona 2
AC current sensor SCT 013-030 - up to 30A
The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.Rebel RB-03 non-contact voltage detector
Non-contact AC voltage detector from 50 V to 1000 V . The device informs about the voltage detection by changing the frequency of sound generated by the built-in buzzer....Zamel Supla LEW-01 - electricity monitor - 1-phase 16A - WiFi - Android/iOS application
The LEW-01 is a single-phase electricity monitor from Zamel with direct measurement up to 16 A. The module communicates via Wi-Fi in the Supla system and enables...Zamel Supla MEW-01 - 3F+N WiFi electricity consumption monitor
MEW-01 is a 3-phase electricity monitor from Zamel that enables remote energy consumption measurement via WiFi . The DIN rail-mounted module is equipped with three 100A...ACHS-7121 Current Sensor Carrier -10A to +10A - Pololu 4030
Current sensor operating in the range from -10 to 10 A based on the Hall effect. The input voltage from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.- Discontinued product
ACS724 current sensor carrier -2,5A to +2,5A - Pololu 4040
The ACS724 is a current sensor module operating in the -2.5 A to 2.5 A range that uses the Hall effect to perform precise current measurements. The module is designed to...ACS724 current sensor carrier 0A to 20A - Pololu 4044
The ACS724 sensor is a module offering precise measurement of linear current from 0 A to 20 A in one direction. Thanks to the use of technology based on the Hall effect, it...ACS724 current sensor carrier 0A to 5A - Pololu 4048
ACS724 is a sensor that allows measurement of unidirectional current in the range from 0 A to 5 A. It has a low internal current path resistance and offers electrical...ACS724 current sensor carrier -30A to +30A - Pololu 4047
The ACS724 module is a compact sensor that offers precise current measurement in the range from -30 A to 30 A. It has a low internal resistance of approximately 1.2 mΩ,...INA228 - current and power sensor - I2C - STEMMA QT / Qwiic - Adafruit 5832
A compact proposition from Adafruit equipped with the INA228 system, which allows you to monitor the power in the circuit. It allows you to measure voltage with a maximum...Grove - AC current sensor TA12-200
The sensor measures the intensity of the current flowing in the pipeline without its opening. Measurement occurs through the insulation on the one wire, output is the current...Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452
Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.Low Current Sensor ACS723 - 5A current sensor - SparkFun SEN-14544
Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and...- Discontinued product
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...Current sensor ACS724 -5A to 5A - Pololu 4041
The ACS724 module is a compact carrier board equipped with the Allegro ACS724LLCTR-05AB current sensor based on the Hall effect. This sensor offers a low resistance of...Module with Hall sensor, magnetic field
Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.Zamel Supla LEW-02 - electricity monitor - 1-phase 100A - WiFi - Android/iOS application
The LEW-02 is a compact, single-phase electricity monitor from Zamel, designed for DIN rail mounting . The module performs precise, bidirectional, semi-indirect measurement...See also
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules
