- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Khadas Edge Max - Rockchip RK3399 WiFi, Bluetooth Cortex A72/A53 + 4GB RAM/128GB eMMC
Khadas Vim Max minicomputer equipped with RockchipRK3399 Dual-core A72 1.8 GHz and Quad-core A53 1.5 GHz, has4 GB of RAMand128 GB of eMMC memory. The board is equipped withWiFiAP6398SandBluetooth 5.0. The module includes such connectors as:: Ethernet Gigabit, HDMI, USB 3.0, USB 2.0, 314-pin contact connector in MXM3 standard. Powered by 5 V to 20 V via USB C.
Operating system for Khadas Edge
The manufacturer has prepared such systems as: Android Oreo, Ubuntu 18.4, Debian 9.0 and more to work with Khadas Edge module. The system can be installed directly on the internal memory of the minicomputer.
Operating systems can be downloaded fromthe manufacturer's website. |
What do I need to run the Khadas minicomputer?
- Power supply with USB plug type C- from 5 V to 20 V (recommended 5 V) with current capacity 2 A. The device has a USB C 3.0 connector with PD support.
- HDMI cable- to connect the screen.
- Mouse and keyboard- to control and enter data into the device.
Front (blue marking):
Designation | Element | Description |
---|---|---|
1 | USB A | USB 3.0. |
2 | USB C | USB 3.0, Display Port V1.2, input 5 V to 20 V (USB PD), can be used for system updates. |
3 | HDMI 2.0 | Female Type A, up to 4K@60 Hz, HDCP 2.2. |
4 | USB C | USB C with power input from 5 V to 20 V (USB PD). |
5 | USB A | USB 2.0. |
6 | Fan connector | 4-pin connector using PWM. |
7 | Reset button | Forcing the plate to reset. |
8 | Function button | Press 3 times for 2 seconds to enter Mask mode. |
9 | Power button | Used to run the plate. |
A | 314-pin connector | Used to place the plate in theCaptain extension. |
B | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
C | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
Rear (red markings):
Designation | Element | Description |
---|---|---|
1 | Li-Pol battery connector | It is used to power the module from theLi-Pol battery. |
2 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
3 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
4 | Mounting area M2x4 | Used to mount a heat sink or extension plate. |
5 | FPC B connector | 10-pin, 0.5 mm raster, USB, I2S (8 channels), I2C, MCU IO. |
6 | FPC A connector | 10-pin, raster 0.5 mm, UART, I2C, SPI, SDMMC, ADC, PWM, I/O, GPIO |
7 | M-Register | Allows eMMC to enter MaskMode. |
Power supply in Khadas Edge
The Khadas Edge mini-computer is powered by a C-type USB connector from 5 V to 20 V. The manufacturer recommends 5 V / 2 A.In our offer you will findpower supplies meeting these parameters. The module can also be powered byLi-Pol batterythrough a dedicated connector.
Khadas Edge Max specification and comparison
Basic information | ||
---|---|---|
Model | Raspberry Pi 4 model B | Khadas Edge Max |
Edition | 6 - 2019 r. | 2018 r. |
Technical specification | ||
Core | Quad-Core ARM Cortex-A72 | Quad-Core ARM Cortex-A53 Dual-Core ARM Cortex-A72 |
Operating systems | Linux Raspbian Windows 10 loT |
Debian Ubuntu Android etc. |
Clocking | 1.5 GHz | 1.5 GHz + 1.8 GHz |
Memory RAM | Three versions
|
4 GB DDR4 |
Memory | microSD card | 128 GB eMMC memory |
GPIO socket | 40-pin connector (2x20 pin) raster 2.54 mm |
Connector FPC A 10-pin raster 0.5 mm FPC B connector 10-pin raster 0.5 mm 314-pin MXM3 connector |
Power supply |
|
5 V to 20 V / 2 A - USB PD USB type C |
Dimensions of the tiles | 85 x 56 x 17 mm | 82 x 57.5 x 5.7 mm |
Interfaces | ||
USB interface | 2x USB 2.0 - socket type A 2x USB 3.0 - socket type A |
1x USB 2.0 - socket type A 1x USB 3.0 - socket type A |
Network interface | Ethernet port 100/1000 Mbps | 10/100/1000 Mbps Ethernet port RTL8211FD |
WiFi interface | Dual Band 2.4 GHz and 5 GHz 802.11 b/g/n/ac |
AP6398S 802.11a/b/g/n/ac 2X2 MIMO with RSDB |
Bluetooth | Low Energy, BLE 5 | Bluetooth 5.0 |
Camera | CSI socket | - |
Touchscreen display | DSI socket | - |
Video | 2 x microHDMI H.265 4K 60 fps H.264 1080p 30 fps OpenGLES 1.1, 2.0, 3.0 |
HDMI 4K |
Communication | UART, SLEEPING, I2C, GPIO | USB, I2C, SPI, I2S, SPDIF, ADC, STM8S MCU IOs |
Additional | - | Tensorflow, Android NN |