• EOL
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino - zdjęcie 1
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino - zdjęcie 2
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino - zdjęcie 3
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino - zdjęcie 4
Waveshare GPS/GSM/GPRS Shield SIM808 - pad on the Arduino - zdjęcie 5

GPS/GSM/GPRS Shield SIM808 Shield - cap for Arduino - Waveshare 11492

Index: WSR-05623 EAN: 5904422374464
Ask a question

Cap for Arduino with SIM808 system which allows you to send text messages, create links in a GSM network, GPRS data transfer and reading of GPS position. Communication via serial interface UART (RX, TX) using AT commands, the kit includes GPS antenna, power adapter and microUSB cable.

GPS/GSM/GPRS Shield SIM808 Shield - cap for Arduino - Waveshare 11492
€57.90
€47.07 tax excl.
Notify me when available
Check quantity
Unavailable
Discontinued product
Free shipping
30 days to return
PayPal payment
Check quantity
Manufacturer: Waveshare
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Description

Cap for Arduino with SIM808 system which allows you to send text messages, create links in a GSM network, GPRS data transfer and reading of GPS position. Communication via serial interface UART (RX, TX) using AT commands. Tile has i.a.: a connector for SIM-card, MIC, speaker and microUSB connector. The kit also includes aGPS antenna, a power adapter 12 V / 1 A and the microUSB cable.

 

GPS/GPRS/GSM Shield dla Arduino

The set includes: GSM/GPRS/GPS Shield, GPS antenna, GSM and Bluetooth, AC adapter and microUSB cable.

 

A detailed description of the connection of the module is included in the user's manual.

 

Connection

The system works with the platesArduino, for example, a version of Uno. Built-in converter USB - UART, it allows for a direct connection to the computer using the AT commands using the suppliedmicroUSB cableand terminal of serial port.

 

 

What is on Board?

GPS/GPRS/GSM Shield dla Arduino - schemat

  1. Module SIM808
  2. System MIC29302
  3. The chip CP2102: converter USB to UART
  4. SMF05C: diode TVS
  5. Rectifier diode 1N5408
  6. Functional pins of system SIM808
  7. Leads of Arduino
  8. USB-UART interface
  9. Connector of DC power
  10. GPS ntenna connector 
  11. Bluetooth antenna connector 
  12. Interface of firmware update
  13. Antenna connector GSM
  14. The SIM card slot 
  15. Connector Jack 3.5 mm headphone / MIC
  16. The GPS indicator diode
  17. The UART transmission signal diode
  18. The diode indicating a connection to a GSM network
  • Quick blinking: after starting
  • Slow blinking: established connection
  • The power indicator diode
  • Switch
  • Control button module SIM808: hold for 1 sec. enables / disables the module
  • The Reset Button
  • The choice of control UART
    • Using CP2102
    • Via pins of the UART interface of Arduino
  • Configuration of UART SIM808
    • SIM_TX: SIM808 UART TX
    • SIM_RX: SIM808 UART RX
  • Setting the voltage level of UART interface

    •  

    Specification

    • Supply voltage: 6 V to 12 V
    • UART communication
    • Support AT command
    • Built-in Converter USB to UART CP2102 with output micro usb slot (cable included in the package)
    • The GSM SIM808 system 
      • Supported bands: 850 / 900 / 1800 / 1900 MHz
      • GPRS of class 1 to 12: speed up to 85.6 kbp/s
      • SIM slot for card, 1.8 V / 3 V
    • 66 channel GPS
      • Sensitivity: -165 dBm
      • Cold start: 30 s
      • Hot start: 1 sec.
      • Accuracy: up to 2,5 m
    • Built-in microphone and speaker
    • Removing echo and noise reduction
    • Built-in Bluetooth 3.0 and RTC clock
    • Operating temperature: -40 to 85 °C
    • Cap works with the plates Arduino, e.g. Arduino Uno and Nukleo
    • Module dimensions: 66 x 53 mm

     

    Set includes

    • GSM/GPRS/GPS Shield
    • GPS antenna
    • GSM antenna
    • Bluetooth antenna
    • The speaker enclosure
    • Power Supply 12 V, 1 A
    • The microUSB - USB cable

     

    Voltage to 6.0 V
    Voltage from 12.0 V
    Interface UART
    GPS - Accuracy -165 dBm
    Test 3
    Package width 13 cm
    Package height 4.5 cm
    Package depth 18.5 cm
    Package weight 0.268 kg
    Send us your question

    Be the first to ask a question about this product!

    Customers who bought this product also bought:

    Products from the same category: