- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Minicomputer Banana Pi miniature version. This model has an ARM Cortex A7 AllwinerH2+ 1 GHz processor and 512 MB of RAM. The board is equipped with: wi-fi, Bluetooth, port miniHDMI, microUSB OTG slot, 40 GPIOs, connectors for the microSD card, as well as four mounting holes. Board dimensions: 65 x 30 x 5 mm.
|
Banana Pi Zero is one of the smallest minicomputers available on the market. Size and outputs are compatible withthe Raspberry Pi Zero. |
Key features
Minicomputer has basic communication interfaces that can be found in office PC computers:
- ARM Cortex A7 Allwiner H2+ processor, running with a clock frequency of 1 GHz,
- 512 MB RAM of internal operating memory,
- wifi 150Mbps 802.11 b/g/n module- it allows to wirelessly connect to the network (to work correctly, it requires an external antenna with u.FL connector)
- system Bluetooth Low Energy BLE 4.0
- microSD slot- just like in the previous versions, the operating system is onthe microSD card which must be purchased separately
- port miniHDMI- Banana Pi Zero has a connector miniHDMI, 1.4 version, through which you can send picture and sound. In our offer, you will also findthe adapter miniHDMI - HDMI.
- microUSB OTG connector - for the connection of peripheral devices compatible with USB OTG standard. In our offer, you will findan adapter microUSB - USB.
- 40 x GPIO- outputs/inputs of general purpose, that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins that support interfaces: I2C, SPI and UART. In our offer are alsogoldpin connectors for self-soldering.
- Video input of CSI
- Power - as in previous versions, Banana Pi Zero is powered via microUSB (in our offer, you will find alsospecial power supplies),
- Board sizes: 65 x 30 x 5 mm
The distribution of elements on the board Banana Pi Zero. In our offer, you will also find suitable cases.
Specifications and a comparison with the Raspberry Pi Zero W
| Basic information | ||
 |
 |
|
| Model | Banana Pi Zero | The Raspberry Pi Zero W |
| Technical specification of | ||
| Processor chipset |
Quad Core ARM Cortex A7 Allwiner H2+ |
Broadcom BCM2835 |
| Operating systems |
Linux Android |
Linux Raspbian |
| Clock frequency | 1.0 GHz | 1.0 GHz |
| RAM | 512 MB of DDR3 | 512 MB of DDR @ 400 MHz |
| Memory | microSD card | microSD card |
| Slot for GPIO |
Connector of 40-pin (2x20 pin) pitch of 2.54 mm for self-soldering |
Connector of 40-pin (2x20 pin) pitch of 2.54 mm for self-soldering |
| Power |
5 V via microUSB |
5 V via microUSB |
| Board sizes | 65 x 30 x 5 mm | 65 x 30 x 5 mm |
| Interfaces | ||
| USB interface | microUSB OTG | microUSB OTG |
| Network interface | - | - |
| The Wi-Fi interface | 802.11 b/g/n | 802.11 b/g/n 150 Mbps |
| Bluetooth | Low Energy, BLE 4.0 | Low Energy, BLE 4.1 |
| Camera | parallel 8-bit interface | the CSI slot |
| LED | The power indicator (red) | The operation ndicator of the system (yellow) |
| Touch display | - | - |
| Video | miniHDMI | miniHDMI |
| Communication | UART, SPI, I2C, GPIO | UART, SPI, I2C, GPIO |
Useful links |
