Product description: 3D printer - Biqu Hurakan
3D printer offering a working area of 220 x 220 x 270 mm . Cool, blue and black colors and slim design give it a modern, elegant look. In addition, the built-in RGB LED allows you to highlight and present the printout. Biqu Hurakan has been equipped with Klipper firmware, which increases the efficiency of the device and improves the quality of printouts. Inside the printer there is a 32-bit Manta M4P mainboard and a 4-core CB1 board, which together ensure reliable operation of the demanding Klipper.
Clipper ready for action
Most hobbyist 3D printers are based on the Marlin system. It has limitations and to circumvent them requires specific knowledge and time. Biqu Hurakan is one of the few printers that comes pre-installed with the Klipper program , which requires no complicated modifications, is easy to use and increases the efficiency of the device. It also reduces print head vibration, improving print quality.
Thanks to the built-in WiFi module , the user can use any device with WiFi access to pause printing, check work progress or adjust the temperature of the nozzle. You can also control the printer using the built-in display.
Quiet stepper motor drivers
The TMC2209 motor driver used in Biqu Hurakan significantly reduces noise during printing, ensuring quiet and peaceful operation of the printer. According to tests, the volume of printing sounds can fall even below 50 dB.
Adjustable heating table power
The printer allows you to adjust the size of the working area to adjust the power of the table. 100W when you only need the center of the platform, 240W when working across the table. This feature will save energy and help the environment .
Other features of Biqu Hurakan
- Automatic leveling system of the working platform
- RGB LED built into the print head
- Filament end sensor
- Efficient cooling system
- Modern design
Specification of the 3D printer - Biqu Hurakan
|Print Thickness:||from 0.1mm to 0.3mm|
|printing speed:||up to 180mm/sec|
|nozzle diameter:||standard: 0.4mm|
|Nozzle temperature:||up to 260°C|
|table temperature:||up to 100°C|
|Operating mode:||USB, WiFi, LAN|