Product description: SkyWalker 20A ESC 2-3S brushless motor controller
Brushless motor controller for current up to 6 A. The optimum power supply is the 2S - 3S li-pol packages (7.4 V to 11.1 V). It has a 5 V / 2 A BEC regulator.
SkyWalker 20A ESC 2-3S brushless motor controller specification
- The tension of work: LiPo 2-3s (7.4 - 11.1 V)
- Continuous flowing current: 20 A
- BEC: 2 A
- Max. Current: 25 A / 10 sec.
- Safe start: the motor will not start up immediately after the battery is connected
- Thrust calibration: linearly configurable, compatible with all available transmitters
- Length: 42 mm
- Width: 25 mm
- Height: 8 mm
- Weight: 19 g
- Connectors:
- Deans x3 plug
- 3-pin connector raster 2.54 mm
- Cables with insulation removed
Programmable controller modes
- Brake: on / off
- Battery types: Li-xx (LiIon, LiPol) / Ni-xx (NiMH, NiCd)
- Low voltage protection: power reduction / total shutdown
- Low voltage protection threshold: low / medium / high
- Start mode: normal / mild / very mild
- Selecting the number of packet cells: automatic / manual
- Reset: restore the default values
