Product description: Brushless motor controller SkyWalker 50A ESC UBEC 2-4S
Brushless motor controller for current up to 50 A. The optimum power supply is the 2S - 4S li-pol packages (7.4 V to 14.8 V). It has a 5 V / 5 A UBEC controller.
Specification of SkyWalker 50A ESC UBEC 2-4S brushless motor controller
- The tension of work: LiPo 2-4S (7.4 - 14.8 V)
- Continuous flowing current: 50 A
- BEC: 5V / 5 A
- Max. Current: 65 A / 10 sec.
- Batteries supported: 2-4 S Lipol, 5-12 S NiMH
- Safe start: the motor will not start up immediately after the battery is connected
- Thrust calibration: linearly configurable, compatible with all available transmitters
- Maximum speed:
- 210 000 rpm: 2-pole engine
- 70 000 rpm: 6-pin motor
- 35 000 rpm: 12-pin motor
- Length: 65 mm
- Width: 25 mm
- Height: 12 mm
- Weight: 43 g
- Connectors:
- Deans x3 plug
- 3-pin connector raster 2.54 mm
- Cables with insulation removed
Programmable controller modes
- Brake: on / off
- Battery types: Li-xx (LiIon, LiPol) / Ni-xx (NiMH, NiCd)
- Low voltage protection: power reduction / total shutdown
- Low voltage protection threshold: low / medium / high
- Start mode: normal / mild / very mild
- Selecting the number of packet cells: automatic / manual
- Reset: restore the default values
