Product description: Filament Fiberlogy FiberSilk 1.75 mm 0.85 kg - Red
FiberSilkfilamentof the Fiberlogy brand inred, is packed with a moisture absorber. It is designed for all3D printersthat do not have a blockage against cartridges from external manufacturers. Filament is distinguished by its water resistance, high strength, impact resistance, very good adhesion and virtually unnoticeable layer boundaries after printing. Visually, the coating of printed objects is characterized by a silky, metallic glow, which allows to bring out all the refractions and curves. It is designed for 3D printing inFFF / FDMtechnology. The diameter of the pillar is1.75 mmand net weight 0.85 kg. The FiberSilk filament can be used for printing e.g. parts of costumes, cosplay accessories, decorations of various kinds, and even jewellery.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy FiberSilk 1.75 mm 0.85 kg - Red.
Note on the philanthropy
During the loading of the filament or during 3D printing, it is possible to notice swelling of the material coming out of the nozzle. This is a completely natural effect, which is caused by the surface tension of the polymers that are part of the material of the felt. It is recommended to set a high airflow during printing and to lower the printing speed for even better printing results.
Suggested parameters for filament printing
| Printing temperature | From 210°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Print speed | From 35 to 60 mm/s |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Red |
| Printing temperature | From 210°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Material | FiberSilk |
| Reel diameter | 200 mm |
| Reel width | 60 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 207 x 225 x 63 mm |
| Net weight | 0.85 kg |
Useful links |
