Description
3-axis digital gyroscope from Grove. Based on ITG-3200. The measurements range is: ± 2000 °/sec. It has a built-in temperature sensor, amplifier and low pass filters. It communicates through an I2C interface to 400 MHz. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Module supplied with 4-pin cable for Base Shield v2.
Specification
- Supply voltage: 3.3 V or 5V
- 3-axis position sensor: gyroscope
- Current consumption:
- Operation: 6,5 µa
- Standby: 5 µa
- Sensitivity: 14 LSB per °/sec
- Full range scale +/- 2000 °/sec
- Acceleration: 10,000 g for 0.3 MS
- The I2C interface at 400 MHz
- 3 built-in speakers, A/C, 16-bit
- Temperature sensor
- Built-in amplifier and low-pass filters
- Dimensions: 20 x 20 mm
|
The product is compatible with Arduino The manufacturer offers a user manual and library for Arduino. |
Connection
The sensor communicates with the microcontroller through the I2C interface. It has the following pins:
| Pin | Description |
|---|---|
| GND | The ground of the system. |
| VCC | Supply voltage 3.3 V or 6 V. |
| Traffic | The data line of the I2C bus. |
| SCL | Line clock the I2C bus. |
|
Grove is a series of modules and sensors that are compatible with Base Shield boards working with Arduino and STM32 Nucleo. |
Useful links |
