Starter set introducing the world of IoT (Internet of Things) for Arduino and Genuino 101 boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others. Connecting of the modules is facilitated by the special BaseShield together with the wires.
The set is sent in a plastic box.
The contents of the set
The kit includes 13 items, description of individual modules is available in the table.
|1||Base Shield v2 - shield for Arduino to connect the sensors with the provided cables.|
|2||Module with buzzer - simple sound signal generator.|
|3||Module with button - board with tact switch button and resistor pulling up to the mass. Communication is a digital signal 0/1.|
|4||Module with LED (set of three colors: blue, red and green) - it has a built in resistor that limits the current on the diode, it can be controlled by PWM signal.|
|5||Module with linear potentiometer - module with a range of 300° and a linear change of value. The resistance is 10 kΩ.|
|6||Module with sound sensor - used to detect the surrounding sound level. It has an analog output. Microphone sensitivity at 1 kHz: from 48 to 52 dB.|
|7||Stepper motor with driver - small stepper motor supplied with the voltage of 5 V. It has a resolution of 64 steps per revolution. Details onthe website of the manufacturer.|
|8||Module with temperature sensor - module measures the temperature from -40 °C to 125 °C with accuracy of 1.5 °C.|
|9||Module with touch sensor - communication with module is a digital signal of 0/1. The response time of the sensor is from 60 MS to 220 MS.|
|10||Module with light sensor - a sensor measures the ambient light intensity. Based on the LM358 chip.|
|11||LCD display with RGB backlight - display screen with backlight, in full color palette. It communicates with the microcontroller via I2C. It has the built-in English and Japanese fonts.|
Vibration sensor with piezoelectric membrane - vibration sensor with piezoelectric membrane. It has a wide working range from 0.001 Hz to 1000 MHz. Details onthe website of the manufacturer.
|13||10 wires of 4-pin Grove - they let you combine modules with Base Shield v2.|