• On sale!

MW-UDB wall RFID reader - 125kHz - black

Index: NEX-21598
The Netronix MD-UDB wall-mounted RFID reader allows for contactless reading of data from Unique transponders. These transponders have a unique 40-bit identification number permanently saved. Each transponder has a unique identification number. The MD-UDB reader uses the 1-wire bus to transmit data read from transponders, the data from the reader is sent in a format compatible with DS1990 chips. The device is also equipped with a touch button and a LED signaling diode. Works with the voltage from 7 V to 25 V. Black housing version.
MW-UDB wall RFID reader - 125kHz - black
€27.90 -20%
€22.32
€18.15 tax excl.
Lowest price 30 days: €21.40
Available
Shipping in 24 hours
PayPal payment
Netronix 125kHz RFID wall-mounted reader - color:
Manufacturer: Netronix

Product description: MW-UDB RFID wall reader - 125kHz - black

The Netronix MD-UDB wall-mounted RFID reader allows for contactless reading of data from Unique transponders. These transponders have a unique 40-bit identification number permanently saved. Each transponder has a unique identification number. The MD-UDB reader uses the 1-wire bus to transmit data read from transponders, the data from the reader is sent in a format compatible with DS1990 chips. The device is also equipped with a touch button, after pressing which the 1-wire bus will be shorted to ground and the device will emit a sound. MD-UDB also has a LED indicator, which lights up red when the reader is connected to the power supply. Feeding the control input (yellow wire) with voltage from 3 V to 14 V causes the color to change to green. The reader works with the voltage from 7 V to 25 V. Black housing version.

MW-UDB RFID wall reader

MW-UDB RFID wall reader.

Reader pins Reader pins.

Leads of the Netronix MW-UDB RFID wall reader

The MW-UDB wall reader from Netronix uses a 1-wire interface to transmit IDs from transponders. The device is equipped with 4-wires:

  • brown - power supply from 7 V to 25 V
  • white - mass
  • green - 1-wire (data output) / UART TX (bootloader)
  • yellow - LED / UART RX control input (bootloader)

Specification of the RFID Netronix MW-UDB reader

  • Supply voltage: 7 V to 25 V
  • Current consumption: 120 mA (average 25 mA)
  • Built-in antenna operating frequency: 125 kHz
  • Transponder reading speed: RF / 64 (1953 b / s)
  • LED color switching voltage: 3V to 14V
  • Reading range: up to 6 cm
  • Antenna: built-in
  • Interface: 1-wire (Dallas 1990)
  • Distance between fixing pins: 42 mm
  • Reader damage voltage: +/- 30V
  • IP protection class: IP54
  • Relative humidity: up to 95%
  • Working temperature: -20 ° C to 50 ° C
  • Housing color: black
  • Dimensions: 83 x 44 x 14 mm

Set contains

  • MW-UDB RFID wall reader - 125kHz - black
  • Pins and mounting screws
Kit contents Kit contents.

Frequency from 125 kHz
Frequency to 125 kHz
Package width 8 cm
Package height 2.5 cm
Package depth 11 cm
Package weight 0.056 kg

Be the first to ask a question about this product!

Product reviews

MW-UDB wall RFID reader - 125kHz - black

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Andrzej 10.01.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: