• EOL

Filament Devil Design PETG 1,75mm 1kg - Purple

Index: DEV-16064 EAN: 5902280032076

Input for 3D PETG printersin purple , wound on a 200 mm diameter spool, net weight 1 kg. The diameter of the pillar is 1.75 mm. The product is compatible with printers that do not have built-in protection to prevent the use of cartridges from external suppliers. Used with open source devices. PET-G filament requires the use of a heated table.

Filament Devil Design PETG 1,75mm 1kg - Purple
€22.90
€18.62 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Devil Design

Attention!

The product has been discontinued. Check other products in category.

Product description: Filament Devil Design PETG 1.75 mm 1 kg - Purple

The presentedPETGcartridge for3Dprintersispurple, it is woundon a 200 mm diameter spool, net weight is 1 kg. The diameter of the cartridge is1.75 mm. The product is compatible with printers that do not have built-in protection against the use of cartridges from external suppliers. It is also used with open source devices. The PET-G filter requires the use of a heated table. The manufacturer also recommends cooling the printout.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PET-G 1,75mm 1kg - Purple

Filament Devil Design PET-G 1.75 mm 1 kg - purple.

Advantages of the PETG pillar

Thermoplastic PETG polymer is characterized by high resistance to abrasion and mechanical damage, so it is used for printing various types of handles. In addition, PET-G filament isodourless,flexible,waterproofand has a very low material shrinkage. The surface of the material is characterized by high gloss. The appropriate temperature of the 3D printer head and table should be determined during printing.

Suggested print parameters of the filament

Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Devil Design pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0.05 mm
Colour Purple
Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Spool - material PET-G
Reel diameter 200 mm
Reel width 70 mm
Mounting hole diameter 52 mm
Package Printed carton
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

Colour purple
Mass 1000 g
Filament - material PETG
Filament - diameter 1.75 mm
Package width 20.5 cm
Package height 20.5 cm
Package depth 7.9 cm
Package weight 1.377 kg

Be the first to ask a question about this product!

Product reviews

Filament Devil Design PETG 1,75mm 1kg - Purple

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Artur P. 02.02.2022 Confirmed purchase Translated review
Everything's fine

Customers who bought this product also bought:

Products from the same category: