- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Devil Design PETG 1.75mm 1kg - Violet
PETG filament from Devil Design in purple color. The material is compatible with 3D printers that do not have protection against the use of materials from other manufacturers. The main features of PETG filament are high strength and low shrinkage . Due to the chemical composition, the material allows you to create models with high aesthetic values, thanks to the good cohesion of the layers , which is maintained even at large angles of inclination of the print surface. On the spool there is a 1 kg cartridge with a diameter of 1.75 mm . The filament is hermetically packed with a moisture absorber.
Devil Design PETG filament in Violet color.
On the spool there is 1 kg of filament with a diameter of 1.75 mm.
PETG filament properties
- Flexible
- Odorless
- Hydrophobic
- With high strength
- With high transparency
- Scratch resistant
Suggested filament printing parameters
| printing temperature | From 220°C to 250°C |
| table temperature | From 70°C to 80°C |
| Print cooling | Optional |
| Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the Devil Design filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.05mm |
| Colour | Purple |
| printing temperature | From 220°C to 250°C |
| table temperature | From 70°C to 80°C |
| Spool - material | PETG |
| Spool diameter | 200mm |
| Spool width | 70mm |
| Mounting hole diameter | 52mm |
| Packaging | Cardboard |
| Desiccant | Yes |
| Vacuum packing | No |
| roundness | +/-0.02mm |
| Size of the package | 205 x 205 x 80mm |
| net weight | 1 kg |
