• EOL

Filament Devil Design PLA 1,75mm 1kg - Purple

Index: DEV-16057 EAN: 5902280032007

A purple-coloured PLA cartridge for 3D printers with a diameter of 1.75 mm and a weight of 1 kg, wound on a reel with a diameter of 200 mm. The whole thing is vacuum-packed with the addition of a moisture absorber. Devil Design filters are designed for all devices not protected against the use of third-party cartridges and for open source devices. The manufacturer recommends cooling the printout.

Filament Devil Design PLA 1,75mm 1kg - Purple
€22.90
€18.62 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Devil Design

Attention!

The product has been discontinued. Check other products in category.

Product description: Filament Devil Design PLA 1,75 mm 1 kg - Purple

The1.75 mmdiameterpurplePLAcartridge for3D printersis sent in the form of a fibre wound on reels of 200 mm diameter. The whole is safely vacuum-packed with the addition of a moisture absorber. The Devil Design pillars are designed for all 3D printers not protected against the use of third-party cartridges and for open source devices. Suggested printout parameters using the described filter are: head temperature between200°C and 235°C andtable temperature from 50°Cto 60°C.The manufacturer recommends cooling the printout.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PLA 1.75 mm 1 kg - purple.

Properties of the PLA pillar

Filament PLA is a thermoplastic polyester produced from renewable raw materials, thanks to which it is biodegradable.PLA is characterized by a very low shrinkage of the material and increased resistancetoUVrays. Due to its minimal water absorption, it is used, among others, for the production of food packaging, surgical threads and even implants. The described filament is characterized by a poorly perceptible smell. What is more, it is not flammable, which significantly increases work safety. PLA is a material fullywaterproofand characterized by high warpage resistance and durability. Due to its properties and ease of use, PLA is intended, among others, for beginner users of 3D printers.

Suggested print parameters for filament

Printing temperature From 200°C to 235°C
Table temperature From 50°C to 60°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Devil Design pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0.05 mm
Colour Purple
Printing temperature From 200°C to 235°C
Table temperature From 50°C to 60°C
Spool - material PLA
Reel diameter 200 mm
Reel width 100 mm
Mounting hole diameter 52 mm
Package Printed carton
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

Colour purple
Mass 1000 g
Filament - material PLA
Filament - diameter 1.75 mm
Package width 20.3 cm
Package height 20.3 cm
Package depth 8.2 cm
Package weight 1.376 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: