- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Devil Design PLA Filament 1,75 mm 1 kg - Maroon
Contribution to 3D printers - PLA filament in Maroon chestnut colour with weight 1 kg and diameter 1,75 mm. All is safely vacuum packed with moisture absorber. Filaments produced by Devil Design are suitable for all 3D printers that are not protected against the use of third-party cartridges and for open source devices.
In our offer of filaments you will also find other materials and colors.
Devil Design PLA 1,75 mm 1 kg - Maroon.
Properties of PLA filament
PLA filament is a thermoplastic polyester made mainly from renewable resources, which makes it biodegradable. PLA is characterised by very low shrinkage and increased resistance to UV rays. Due to its minimal water absorption, it is used for food packaging, surgical threads, and even implants. In addition, it is not flammable, which significantly increases safety at work. PLA is fully waterproof and has a high resistance to warping. PLA felt because of its properties and ease of use is intended for 3D printer beginners, among others.
Suggested parameters for printing with PLA felt
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | Maroon - chestnut |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool - material | PLA |
| Melting point of material | Approximately 50°C |
| Material shrinkage | Very low |
| Packaging | Carton |
| Moisture absorber | Yes |
| Density | 1.24 g/cm3 |
| Roundness | +/- 0,02 mm |
| Net weight | 1 kg |
Useful links |
