- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Fiberlogy HD PLA Filament 1,75 mm 0,85 kg - White
HD PLA Filament in white color, designed for 3D printers, which operate in FFF / FDM technology. Product has a net weight of 0,85 kg. It is vacuum packed with moisture absorber. Recommended printing temperature is between 200°C and 230°C. The diameter of the filament is 1,75 mm. HD PLA filament can be used for example to print various types of prototypes, toys, individual elements of toys, jewellery, decorations, etc. The material is made of renewable resources, which makes it biodegradable.
Fiberlogy HD PLA Filament 1,75 mm 0,85 kg - White.
In our offer of filaments you will also find other materials and colors.
Properties of HD PLA
HD PLA material is characterised by biodegradability. The surface of printed models is slightly glossy. In order to obtain properties similar to ABS it is possible to heat the printout in an oven (maximum drying time is 50°C/4h). After heating, the printout has an increased impact strength and resistance to high temperatures.
Suggested parameters for printing with felt
| Printing temperature | From 200°C to 230°C |
| Table temperature | 50°C to 70°C |
| Print cooling | Recommended |
|
Due to differences in printer construction, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.02 mm |
| Colour | White |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Spool material | HD PLA |
| Air supply | From 75% to 100% |
| Flowrate | From 90% to 100% |
| Printing Speed | Max. up to 100 mm/sec. |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,01 mm |
| Substrate | Glass, masking tape |
| Retraction direct | 2 to 3 mm |
| Bowden wire retraction | 4 to 6 mm |
| Retraction speed | 20 to 45 mm/s |
| Drying conditions | 50°C/4h |
| Net weight | 0,85 kg |
Fiberlogy HD PLA Filament 1,75 mm 0,85 kg
PLA plastic is made from natural raw materials, such as corn meal and sugar cane. Due to the trouble-free and above all safe use it is most often recommended material for people who are just beginning their adventure with 3D printing.
PLA material is characterized by low shrinkage and increased resistance to harmful UV radiation. These features make all prints are durable and retain their original appearance and properties for a long time.
Fiberlogy HD PLA 1,75 mm - properties and manufacturer's recommendations
The described HD PLA filament is fully waterproof and safely packed before shipping. In addition, it is characterized by increased resistance to mechanical damage, including stretching.
Universal Fiberlogy HD PLA felt with a diameter of 1,75 mm and weight of 0,85 kg can be successfully used not only in 3D printers, but also in popular printing pens.
