- Reduced price
Product description: Filament Fiberlogy PLA Mineral 1.75 mm 0.85 kg - with reusable spool - Concrete
Concrete-colored filament . A characteristic feature of 3D models obtained with the use of the PLA Mineral product line is a unique appearance that resembles plaster casts . The effect of a satin surface is obtained thanks to the addition of chalk. The presented thermoplastic will find application in printing precise mock-ups and sculptures. The filament diameter is 1.75 mm and the net weight is 0.85 kg. Material it is wound on a spool.
In our offer of filaments you will also find other materials and colors.
Fiberlogy PLA Mineral Filament 1.75 mm 0.85 kg - with reusable spool - Concrete.
Properties of the PLA Mineral filament
PLA Mineral is a unique proposition among Fiberlogy products. The 3D models that are formed from it have a characteristic satin surface that resembles plaster. This type of thermoplastic can be used primarily in art workshops and architectural studios. The high detail of the material allows the use of PLA Mineral, among others in the following projects:
- Mock-ups: structures, buildings, interior miniatures of living quarters
- Decorations: sculptures and figurines requiring great detail
- Prototypes: small elements, concept models
Suggested filament printing parameters
| Printing temperature: | from 190 ° C to 230 ° C |
| Table temperature | 50 ° C to 70 ° C |
| Cooling the print | from 75% to 100% |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Filament technical specification
| Parameter | Range |
|---|---|
| Filament Diameter: | 1.75 mm |
| Filament dimensional tolerance: | +/- 0.02 mm |
| Oval dimensional tolerance: | +/- 0.01 mm |
| Color: | concrete shade (dark gray) |
| Printing temperature: | from 190 ° C to 210 ° C |
| Table temperature: | 50 ° C to 70 ° C |
| Spool - material: | PLA Mineral |
| Closed chamber: | not required |
| Supply: | from 75% to 100% |
| Flowrate: | from 98% to 100% |
| Print Speed: | from 35 to 60 mm / s |
| Subsoil: | glass, masking tape |
| Direct retraction: | yes, from 2 to 3 mm |
| Bowden Retraction: | yes, from 4 to 6 mm |
| Retraction speed: | from 20 to 45 mm / s |
| Drying conditions: | 50 ° C / 4 h |
| Spool diameter: | 200 mm |
| Spool width: | 80 mm |
| Mounting Hole Diameter: | 52 mm |
| Size of the package: | 205 x 205 x 90 mm |
| Net weight: | 0.85 kg |
