- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Acrylic ZeroDock forRaspberry Pi Zero
The docking stationmade of laser-cut acrylic allows you to optimise your work with specially prepared spaces for the various accessories needed to work withRaspberry Pi Zero...it allows you to keep your accessories together with your minicomputer.The station can be successfully used asa stand fora finished project.
The set includes
- 4-layer laser cut acrylic dock
- Mini contact plate
- Necessary assembly elements
Docking station with contact plate.
Arrangement of elements.
Assembly instructions
- Remove the protective film from the housing components before installation.
- Place a black panel with cut-out slots for accessories on the transparent panel without a slot for the microUSB and miniHDMI ports.
- On the two layers that have already been laid, lay 3 transparent panels with cut-outs for accessories, all arranged so that the mounting holes fit together.
- Screwthe Raspberry Pi Zeroto the whole with 12 mm screws and nuts, orienting them so that the notch in the edges of the two top plates allows for free connection of microUSB and miniHDMI cables.
- Place the last black layer with no space for accessories at the very bottom of the stack, orienting it accordingly.
- Tighten the whole thing using 17 mm screws and cap nuts, placing the nuts at the bottom of the stack.
- Place the small contact plate by inserting it into the prepared place, it can also be glued with double-sided tape.
Useful links |
