• EOL
L298 35V/2A H-Bridge - two channel motor controller
L298 35V/2A H-Bridge - two channel motor controller
L298 35V/2A H-Bridge - two channel motor controller
L298 35V/2A H-Bridge - two channel motor controller
L298 35V/2A H-Bridge - two channel motor controller - zdjęcie 1
L298 35V/2A H-Bridge - two channel motor controller - zdjęcie 2
L298 35V/2A H-Bridge - two channel motor controller - zdjęcie 3
L298 35V/2A H-Bridge - two channel motor controller - zdjęcie 4

L298N - two-channel 35V / 2A motor controller

Index: SPF-11189
Ask a question

Module with a two-channel direct current motor controller L298. It is powered up to 35 V. The maximum channel current is 2 A. The unit has a built-in 5-volt voltage regulator to supply any additional circuits requiring an adjustable 5-volt supply to 1 A.

L298N - two-channel 35V / 2A motor controller
€15.90
€12.93 tax excl.
Notify me when available
Check quantity
Unavailable
Discontinued product
Free shipping
30 days to return
PayPal payment
Check quantity
Manufacturer: OEM

Attention!

The sale of the product has been completed. Check others in this category.

Specification

  • Supply voltage: 6 V to 35 V
  • Built-in 5 V regulator for supplying any additional circuits requiring an adjustable 5 V to 1 A supply
  • Maximum output current: 2 A per channel
  • The module allows to control two DC motors
  • The motor outputs and power inputs have been fed to the ARK screw connector
  • Input pins of the logical part are available on goldpin connectors - raster 2.54 mm
  • The board contains all the passive elements necessary for the correct operation of the controller
  • The system has a heat sink installed
  • The board dimensions are: 65 x 65 mm

In our offer you will also find anL298 chip.

Description

A module with the popular L298 controller, which allows to control the direction of rotation and speed of two DC motors. Thanks to ARK screw connections, the power supply and the motors themselves can be easily connected by screwing the wires with a screwdriver. The control signals have been output to popular goldpin connectors, which allows you to connect the system to the starter boards, e.g. from Arduinousing wires.

For Arduino users there is a sampleprogram availableto facilitate the module operation.

The outputs are .

PinDescription
MOT DC Motor supply voltage.
GND The weight of the system.
+5V Power supply of any additional circuits - see documentation for details.

IN1, IN2

Control the direction of channel A.
ENA PWM signal for motor speed control A.

CSA

CSB

 Exhaust pipes for monitoring motor current A and B.
IN3, IN4 Control of channel B direction
ENB PWM signal for motor speed control B.

L298 controller truth table

IN1 / IN3

IN2 / IN4

Engine outputs

Status
high

 state of
low		 The motor turns at the maximum setpoint speed via pwm (other than 0) clockwise.
Status
low		 state of
high		 The motor turns at the maximum setpoint speed via pwm (different from 0) counterclockwise.
Status
low		 state of
low		 When the high state is given to the PWM input - fast stop.
state
high

state of

high

 When the high state is given to the PWM input - fast stop.
state
high		 state of
high

When low state is given to PWM input - free braking (soft stop).

Video

Film describing the operation of the H-bridge - DC motor controller.

Voltage to 6.0 V
Voltage from 35.0 V
Current 2 A
Channels 2
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg
Send us your question

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: