- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Sensor of carbon monoxidepowered by aninternal lithium battery that does not require charging or replacement throughout the usage of up to 10 years. Through the use of advanced electrochemical sensor, it is able to reach sensitivity at the level of 50 ppm. It also has the function of automatic verification of end-of-life and low battery, in case of detection of violations it will inform the user by a sound signal. The device can be mounted on the wall or just put on the shelf. Due to its highresistance to shocks and moisture, it can be used both in private households and in trailers, yachts, etc. In the kit is an additional mounting bracket.
|
Did you know that only two or three inhalations of toxic smoke from a fire can cause loss of consciousness? For adults, death may occur within three minutes, for children even in under one minute. |
Sensors of carbon monoxide are recommended to be installed in boiler rooms, bathrooms, kitchens, halls, and garages.
Specification
- Model: 9X10-PLT
- Detected: carbon monoxide
- The volume of the alarm: 85 dB (at a distance of 3 m)
- Operating temperature range: -10 °C to +40 °C
- Humidity range operating: 30% to 90 % RH non-condensing
- Temperature range: -20 °C to +60 °C
- Humidity range: 30% to 90% RH non-condensing
- Sensor: electrochemical
- Power supply: built-in lithium battery
- Compability with standards: EN50291-1:2010 and EN50291-2:2010
- Service life: 10 years
- Dimensions: 112 x 72 x 35 mm
- Weight: 150 g
|
Attention! Before connecting, refer to the kit's instructions. |
