- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description of product: transparent OLED display
Module of a transparent LCD display SprakFun with a resolution of128 x 64 pixelsallows you to view the image in1 - bit color depth. The image, regardless of the time of day, is very clear. The module has7168 fully transparent pixels. To connect it to the project, thanks to the handy Qwiicsystem,you do not require soldering of the module.
Control of the OLED display is based on the libraryHyperDisplay. This module, due to the requirement of a large number of dynamic memory, does not work with microcontrollers such asthe Atmega328. In addition, the power source must be strong enough to deliver about 400 mA to the display. The module communicates viaSPIorI2C.
Specification of transparent LCD display
- Display resolution:
- whole: 128 x 64 px,
- transparent part: 128 x 56 pixels
- 1 - bit color depth
- Communication interface:
- SPI: 400 kHz
- I2C bus: 10 MHz
- I2C address:
- 0x30 (default)
- 0x31
- Works with the voltage of 3.3 V
- Current consumption: less than 200 mA per pixel
- Display dimensions: 35.5 x 18 mm
- Glass sizes: 42 x 27,16 mm
|
The product is compatible withArduino Required driver, e.g. SparkFun Thing, Plus ESP32 WROOM |
Useful links |
