- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Cap, type Hat, for Raspberry in version 4B, 3B+, 3B, 2B, A+, B, Zerowith RCA connectors. Used in the device of high-quality, DAC chip from the Burr-Brown has a resolution of 24-bits, runs at a frequency of 192 kHz. The advantage of this board is the hardware driver of the sound with the support for applications of mixer type.
|
The DAC+ Pro versionis designed for music lovers - it has :
|
The device has a connector suitable for the GPIO pinsof the Raspberry version 4B, 3B+, 3B, 2B, A+, B, ZeroMinicomputer must be purchased separately.
Key features
- Two built-in RCA slots - gilded
- High quality converter DAC Burr-Brown provides a resolution of 24 bit and works with a frequency up to 192 kHz.
- Has a built-in level of sound controller which can be controlled by programs of mixer type, e.g. the ALSA mixer.
- Board has a special connectors for the GPIO Raspberry Pi, to connect it, you don't need any extra wires or adapters. Works with the minicomputer in version 3 B, 2 B, Zero, B+ and A+.
- The device is powered with a Raspberry Pi and does not require an additional power supply.
- Has a built-in EEPROM memory typical for a standard HAT, thanks to which, in the future, the Raspberry Pi will automatically recognize the device. This function is not supported.
- Has a dual clock generator: 44,1 / 88,2 / 176,4 kHz and 48 / 97 / 192 kHz with low Jitter index.
- The possibility of modification for connecting an external power and additional converters DAC - connectors should be self-soldered.
- The device works withthe Raspberry version 4B, 3B+, 3B, 2B, A+, B, Zero.
- The weight of the tiles is 20 g, dimensions 55 x 65 x 15 mm.
|
Detailed description can be found onthe website of the manufacturer. |
Introduction of the modules from HiFiberryseries.
Connecting
HiFiBerry installation is very simple, a memory card need to be inserted into the card reader of the computer, then runthe configuration programand select the appropriate plate and the operating system. The app will automatically install the operating system with appropriate driver. After passing the card to the Raspberry Pi, HiFiberry board will already be properly configured.
Description of the installation of a finished operating system, can be found atthis address, the list of supported systems is available onthe website of the manufacturer.
The configuration program HiFiBerryis very simple and intuitive.
Video
Film facilitating selection of a suitable version of the HiFiBerry.
|
Online can be found the systemMax2Playfor HiFiBerry which allows you to create configuration of multiroom, using several models of the Raspberry. More information on blogMalinowePi. |
Accessories
In our offer, you will finddedicated to HiFiBerry and Raspberry Pi cases.
Minicomputer Raspberry Pi with HiFiBerry in a dedicated case.
Useful links |
