- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The module is equipped with a microcontroller with 32 bit ARM Cortex M3 core enabling connection via wi-fi and NFC. The system has GPIO connectors, popular I2C, SPI, UART interfaces and analog inputs and outputs with the ADC and DAC converters. The Amoeba module can support Ethernet through compatible pins onArduino. The supply voltage is 5 V.
Pins
The board has popular I2C, SPI, UARTinterfaces and maximum 30 GPIOs, ADC and PWMinterfaces. The module establishes a connection with wi-fi and NFC.
The pins are compatible withArduino
Specification
- Working voltage: 5 V
- Microcontroller: 32-bit ARM Cortex M3 - 166 MHz
- ROM memory: 1 MB
- Memory: SDRAM: 2 MB
- Memory: SRAM: 512 KB
- Wi-fi: 802.11 b/g/n
- NFC: read / record
- Supports USB OTG
- The service of the SDIO device / controllers of SD cards
- 10 / 100 MII / RMII / RGMII Ethernet interface
- Has the SSL motor
- 30 x GPIO
- 2 x SPI communication port
- 3 x UART communication port
- 4 x I2C communication port
- 2 x I2S / PCM communication port
- 4 x PWM port
- 2 x ADC port
- 1 x DAC port
Useful links |
