|
Attention! The product has been discontinued. Check other products incategory. |
Product description: 3D printer - ATMAT Galaxy 600
ATMAT's Polish printer allows you to print elements with dimensions of 500 x 500 x 600 mm. The ATMAT Galaxy printer is closed in a tightworking chamber.It has a head with adouble extruder, whichallows for printing in different colours or materials, additionally the head has LED backlighting. A large 7" touch screen allows for easy movement through the printer's interface. The device has beenadapted for industrial use.
|
The printer is available in different sizes! ATMAT Galaxy 500: 1100 x 950 x 750 / 80 kg - printout: 400 x 400 x 500 mm ATMAT Galaxy 600: 1200 x 1050 x 850 / 90 kg - printout: 500 x 500 x 600 mm |
ATMAT Galaxy 3D printer.
The application of theDIRECT typeextruder in ATMAT Galaxy allows to print from a wide range of filamentsfrom PLA, PET,ABStoflexible materials, rubber or plastics withadmixtures ofwood, metals or mineral additives.
Large workspace in ATMAT Galaxy
The printer will easily meet the industrial requirements, it will be appreciated especially by companies that want to increase the efficiency of their operations by using additive technologies. A large400 x 400 x 500 mmworking area and the use of small nozzles(from 0.25 to 0.8 mm) ensures high accuracy, large print sizes.
Large workspace in ATMAT Galaxy.
Wireless communication
ATMAT Galaxy has a built-inwireless communication module - WiFi, which allows you to remotely transfer files to the printer, start printing and control print parameters. Wireless communication is especially useful in large plants, where it is required to manage multiple devices at once.
Wireless communication in ATMAT Galaxy.
Dual extruder in ATMAT Galaxy
The printer is equipped with adouble-typedirectextruderhead,working witha wide range of filaments (PLA, ABS, PET-G,TPU, HIPS, NYLON, Laywood, or Laybrick). The double extruder allows you to use two materials simultaneously. The maximum nozzle temperature is290°C.Both free and commercial Slicer software can be used to create models.
Dual extruder head in ATMAT Galaxy.
Safety and health protection
The Galaxy ATMAT was locked in a sealedworking chamber.The forcedventilationsystem is responsible for the elimination of all harmful fumes and chemical compounds that are produced during printing. The printer is therefore environmentally friendly and safe for users. The built-in safety button allows you to stop working immediately.
Tight working chamber with safety button.
Active temperature control
The printer is equipped witha chamber heating control system, which allows to maintain a constant, optimal temperature inside the working chamber, regardless of the conditions outside. It guarantees the right working environment for demanding materials, preventing the printout from delaminating and tearing off the table surface.
Temperature control system.
Stable operation of the ATMAT Galaxy printer
The construction of the device was assembled from elements from renowned manufacturers, obtaining high efficiency and reliability. Proven, stable components combined with our own solutions ensure continuity of work and failure-free operation.
High quality components.
ATMAT Galaxy 600 printer specifications
| Technical Specification | |
|---|---|
| Printing technology | FFF (FDM) |
| Work area | 500 x 500 x 600 mm |
| Case | Sturdy, closed, aluminium construction. Separate chamber for pillars and other operating elements |
| Printing environment | Closed working chamber with temperature control |
| Maximum chamber temperature | 45°C |
| Working platform | Automatic table calibration, heated |
| Working table material | Granite slab |
| Maximum working table temperature | 140°C |
| Nozzle diameter | 0.4 mm (basic) Applicability: 0.25 mm, 0.30 mm, 0.35 mm, 0.60 mm, 0.80 mm |
| Number of extruders | 2 |
| Extruder type | Direct |
| Maximum head temperature | 290°C |
| Layer height | 0.1 mm to 0.6 mm |
| Nominal print speed | 150 mm/s |
| Print speed in HQ mode | 80 mm/s |
| Maximum travel speed | 200 mm/s |
| X/Y axis positioning accuracy | 7 μm |
| Positioning accuracy of the Z axis | 1.25 μm |
| Software package | Cura |
| Software supported file formats | .stl, .obj |
| Supported materials | PLA, PET-G, ABS, TPU, PC, PA, ESD Supporting: HIPS, PVA |
| Diameter of material | 1.75 mm |
| Form of material | Reel |
| Supported spool masses |
2x 0.85 kg / 1 kg / 2.5 kg / 4 kg |
| Communication | WiFi, LAN (connection to router), USB stick |
| File format supported by the printer | .gcode |
| Control | 7" Touchscreen |
| Remote preview | - |
| Working environment temperature | from 15°C to 25°C |
| Power supply | 230 V / 50 Hz |
| Maximum power | 1400 W |
| Average power consumption for printing with PLA | 400 W |
| Dimensions | 1200 x 850 x 1100 mm |
| Mass | 90 kg |
The set includes
- ATMAT Galaxy 600 3D printer
- Service kit
- Two reels of the pillar
- Technical documentation
Useful links |
