- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Anycubic Photon M3 - resin
3D printer with a working area of 163 x 102 x 180 mm . The Photon M3 is cured by an efficient UV light source with a parallel matrix and a monochrome display with a diagonal of 7.6 '' . The device ensures high quality of molded models with a resolution of 4096 x 2560 px . The dimensions of the device structure are 269 x 256 x 425 mm.
3D printer - Anycubic Photon M3 - resin .
The device offers the highest quality of 3D prints .
The highest quality of prints
The Photon M3 enables extremely accurate resin models with an ultra-high resolution of 4096 x 2560 pixels. The device is able to form 3D prints with high dimensional accuracy and complex details.
Large working field
The 7.6 '' monochrome display used in the Anycubic Photon M3 allows you to create the highest quality 3D prints with a maximum dimensions of 163 x 102 x 180 mm. Such a large working area allows the formation of larger 3D models without the need to divide them into smaller elements.
Efficient lighting matrix
Thanks to the Anycubic LighTurbo matrix light source system, the matrix LED elements provide high lighting energy, thus enabling high-speed printing with the highest quality.
Sharp and clear edges
The Photon M3 uses an LCD screen with a very high contrast of 400: 1. This parameter enables obtaining 3D prints with a better surface finish, characterized by sharp and clear edges.
The LED matrix provides efficient illumination of the hardened resin .
Fast work while maintaining high quality 3D prints .
Even faster printing
For Anycubic Photon M3, the fastest printing speed can reach up to 50mm / h. Printing a 3D model with a height of 12 cm takes only 2.5 hours. This is a very good result compared to competing devices in this price range.
A new printing platform
Photon M3 is equipped with an improved platform on which 3D models are formed. The new build plate has a textured checkerboard pattern that greatly improves the adhesion of the first print layers.
Convenient menu navigation
The device is controlled via a convenient 2.8 '' touch display. The menu layout is clear and intuitive. It allows easy adjustment of printing parameters.
Dedicated slicer
Slicer is a printer software, which allows you to set printing parameters for 3D models. In the case of Anycubic, it is uncomplicated to use. It should not cause problems even for less experienced users.
Easy-to-use menu .
Specification of the 3D printer - Anycubic Photon M3
| Technical Specifications | |
|---|---|
| Power: | 55 W. |
| LCD screen type: | monochrome, 7.6 '' |
| Working area volume: | 2.99 l |
| Light transmittance: | 4% |
| Contrast ratio: | 400: 1 |
| Source of light: | parallel LED matrix |
| Print resolution: | 4096 x 2560 px (4K +) |
| Working field: | 163 x 102 x 180 mm |
| Print Speed: | up to 50 mm / h |
| Touchscreen: | 2.8 '' |
| Communication: | USB type A 2.0 |
| Printer dimensions: | 269 x 256 x 425 mm |
| Mass: | 7 kg |
Useful links |
