Description: Li-Pol PKCell Battery Pack 2000 mAh 1S 3.7 V - 2-pin JST connector
Lithium polymer battery pack with a cell capacity of 2000 mAh. Output voltage is 3.7V, and constant discharge current is 0.5C. It is used in model cars and robotics. The battery terminals are wires with a two-pin JST connector. The cell is characterized by long life. Dimensions of the product are 60 x 42.5 x 8.3 mm.
In our offer there are also chargers suitable for packs.
Li-Pol PKCell Battery Pack 2000 mAh 1S 3.7 V - 2-pin JST connector.
Battery pack specification
- Brand: PKCell Battery
- Cell type: Li-Pol
- Number of cells: 1
- Battery voltage: 3,7 V
- Capacity: 2000 mAh
- Current capacity: 0.5C
- Connectors: JST - 2.00 mm pitch
- Cable length: 10 cm
- Compliance with certification: RoHS
- Dimensions: 60 x 42.5 x 8.3 mm
How to charge Li-Pol batteries correctly?
Li-Pol batteries are not resistant to discharge or overcharge. It is therefore worth knowing how to properly charge Li-Pol batteries. During their use the voltage must not drop below 2.4 V and rise above 4.2 V per cell. Exceeding these values causes significant deterioration of properties and reduction of battery lifetime. Additional complication is low resistance to high temperatures (overheating) during charging, therefore it is recommended to use specialized and dedicated chargers.
Used batteries should be returned to a recycling centre or at a shop when buying new ones. Under no circumstances should they be opened or disposed of with mixed waste. Damaged batteries, in which electrolyte has leaked, should not be used because of their harmful effects on health.
CAUTION!
Before use, please read the LI-POL BATTERY USE AND WARRANTY TERMS!
Useful links |
