INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max -
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max -
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max -
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max -
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - - zdjęcie 1
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - - zdjęcie 2
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - - zdjęcie 3
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - - zdjęcie 4

Bidirectional current / power sensor - INA219 - 26V 3,2A - STEMMA AT / Qwiic - Adafruit 904

Index: ADA-19255
Bidirectional current and powersensor manufactured by Adafruit. It has an embedded INA219 chip, two STEMMA QT / Qwiic standard connectors located on both sides of the board and leads as solder fields. It is used to measure high DC voltage and current over the I2C bus with an accuracy of 1%. Sensor can measure maximum voltage up to 26 V DC despite of 3 V or 5 V supply.
€12.70
€10.33 tax excl.
Waiting for confirmation of delivery date
Product unavailable
30-day returns
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Product description: Bidirectional current/power sensor - INA219 - 26V 3,2A - STEMMA AT/Qwiic - Adafruit 904

Bidirectionalcurrentandpowersensor manufactured byAdafruit. It has built-inINA219chip, twoSTEMMA QT / Qwiicstandard connectors placed on both sides of the board and leads as solder fields. It is used to measure high DC voltage and current over theI2Cbus with an accuracy of 1%. The sensor can measure maximum voltagefrom 0 V to 26 V DC(despite of 3 V or 5 V power source). The amplifier measures the voltage across a 0.1 Ohm resistor. The maximum input difference of the amplifier is +/- 320 mV, which allows to measure current up to +/- 3.2 A. Witha 12-bit ADC, the measurement resolution is 0.8 A.

Product is compatible with Arduino and Raspberry Pi.

A detaileduser guideis available on the manufacturer's website, which includes wiring diagrams for each controller. The guide makes it significantly easier to get started with the module.

Technical specification of the module

  • Chip: INA219
  • Type of module: bidirectional current/power sensor
  • Supply voltage: 3 V to 5 V
  • Communication interface: I2C bus
  • Interface address: 0x40 / 0x41 / 0x44 / 0x45 (jumper selectable)
  • Equipped with current sensing resistor 0.1 Ohm 1% 2 W
  • Measurement ranges
    • maximum voltage measurement: from 0 V to 26 V DC
    • maximum current measurement: up to +/- 3.2 A with a resolution of +/- 0.8 mA
  • accuracy of measurements: up to 1%
  • Leads:
    • solder fields
    • STEMMA QT / Qwiic connectors
  • Dimensions: 25.6 x 20.4 x 4.7 mm

Contents of the kit

  • Bidirectional current/power sensor - INA219
  • Goldpin connectors - 2,54 mm pitch
  • Terminal connector - 1 pc.

Dwukierunkowy czujnik prądu/mocy - INA219

Bidirectional current/power sensor - INA219.

We also offer a wide range ofsensorscompatible with popular Arduino and Raspberry Pi.

Take special care when connecting devices that can cause rapid current draw (such as DC motors). These can cause problems on the power lines.

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38

I2C converter for HD44780 LCD display

The I2C converter for the popular display with controller HD44780 for example, 2x16 characters. Thanks to this system, two data lines and supply 5 Volts and groundare enough...
Index: LCD-02352
Index: LCD-02352
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.43 Price €1.43

DFRobot Gravity v2.0 - I2C Digital Wattmeter

A module that allows you to measure electric energy consumption of up to 26 V / 8 A. The maximum measurement error is approx. 0,2%. It communicates through an I2C interface. It...
Index: DFR-13753
Index: DFR-13753
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.24 Price €7.24

ACS712 current sensor - 20A

The module with ACS712 current sensor. It allows you to measure current from 0 A to 20 A for both AC and DC, basing on Hall effect. The system's sensitivity is 100 mV/A. It is...
Index: OST-14275
Index: OST-14275
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.65 Price €3.65

Extension GPIO Raspberry Pi 3/2/B+ to the contact plate + tape

The module allows connection of the GPIO leads of the minicomputer Raspberry Pi 3, 2 and B + to popular breadboards with 830 and 400 holes, using an attached to the set,...
Index: RPI-02892
Index: RPI-02892
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.28 Price €3.28

Step-Down Voltage Regulator D24V25F5 - 5V 2,5A - Pololu 2850

Step-down converter with 5 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 6 V to 38 V. The module dimensions are 18 x 18 mm.
Index: PLL-02753
Index: PLL-02753
Available, 24h shipping!
(Check quantity)
Regular price €16.04 Price €16.04

Module with USB socket And soldered connectors

A module with a USB A socket for connecting a type A USB plug to any circuit. Standard 2.54 mm pin raster , allows direct connection of the module to the contact plate or...
Index: MOD-16154
Index: MOD-16154
Available, 24h shipping!
(Check quantity)
Regular price €1.74 Price €1.74

Soldering set: 30W soldering iron tool + sucker, tin and accessories

The kit includes: soldering iron 30 W supplied by a mains voltage of 230 V, tin vial, tin sucker, stand. a spare tip, eraser and a tip for the sucker.
Index: LUT-03525
Index: LUT-03525
Waiting for confirmation of delivery date
Regular price €8.78 Price €8.78

JustPi Set of JST-SM 2/3/4/5pin connectors (male + female) and female + male pins for socket housing - 200pcs.

JST-SM connectors set justPi consists of 5 sets of plugs and sockets with number of pins 2 / 3 / 4 / 5. The connectors have 2.50 mm pitch. The housing of the connectors is...
Index: JUS-19605
Index: JUS-19605
Available
(Check quantity)
Regular price €4.38 Price €4.38

Stand for a soldering iron - Vorel 79386

Universal stand for soldering irons, suitable for most of resistance soldering irons. The set also includes a sponge.
Index: NSZ-00673
Index: NSZ-00673
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.18 Price €2.18

Rosin 40g

Flux with the addition of activators to facilitate soldering.
Index: NSZ-00169
Index: NSZ-00169
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.62 Price €0.62

On-Off Switch RS-101-7C (T-120) - 250V/6A - black

On-off switch. Total height: 25 mm. Connectors are screw terminals.
Index: UCC-08382
Index: UCC-08382
Waiting for confirmation of delivery date
Regular price €0.37 Price €0.37

Products from the same category

Hall sensor AH49E - Waveshare 9522

Module with Hall sensor with analog and digital output. It works with voltage from 2.3 V to 5.3 V. It provides the detection of a magnetic field.
Index: WSR-04494
Index: WSR-04494
Waiting for confirmation of delivery date
Regular price €3.52 Price €3.52

AC current sensor SCT 013-030 - up to 30A

The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...
Index: MOD-04273
Index: MOD-04273
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38

Voltage divider 5V/25V for Arduino

A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.77 Price €0.77

ACS711EX current sensor -31A do +31A - Pololu 2453

Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.73 Price €4.73

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.28 Price €14.28

ACS709 current sensor -75A do +75A - Pololu 2199

Current sensor operating in the range of +/- 75 A, based on the Hall effect. The output is analog voltage. Supply voltage from 3.0 V to 5.5 V.
Index: PLL-00526
Index: PLL-00526
Available, shipping 24h!
(Check quantity)
Regular price €18.68 Price €18.68

Module with Hall sensor, magnetic field

Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.
Index: OST-14290
Index: OST-14290
Delivery scheduled for 2022-01-30
Regular price €1.01 Price €1.01

DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A

The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932
Delivery scheduled for 2022-02-03
Regular price €19.78 Price €19.78

ACS714 current sensor -30A to + 30A - Pololu 1187

Current sensor operating in the range of +/- 30 A, based on the Hall effect. The output is analog voltage. Supply voltage from 4.5 V to 5.5 V.
Index: PLL-00524
Index: PLL-00524
Available, shipping 24h!
(Check quantity)
Regular price €13.18 Price €13.18

iNode Energy Meter - energy consumption monitor - phototransistor

iNode Energy Meter with a photoresistor is a wireless power consumption monitor with built-in memory. Designed mainly for home automation. Thanks to the power consumption...
Index: INO-09929
Index: INO-09929
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.98 Price €23.98

Module with Hall sensor - Iduino SE014

The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Delivery scheduled for 2022-01-30
Regular price €1.45 Price €1.45