- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description of product: Adafruit NeoPixel Slim LED Dot Strand - RGB LED strip WS2811 20LED / m, 5V - 1m - Adafruit 5225
LED strip consisting of 20 addressed RGB LEDs based on the WS2811 chip . The strip is made of only wires enclosed in silicone insulation, and the LEDs are sealed with epoxy, allowing them to be used outdoors, as well as in wearable projects. Despite the increased resistance to humidity, the tape cannot be washed or cleaned under water. WS2811 LEDs are spaced about 50 mm . The supply voltage of the LED strip is 5 V , the minimum current required for proper operation should be 4 A. The 3-pin JST connector is used for power supply. In order to operate the tape, an appropriate driver for the addressed LEDs or a module with a microcontroller, eg Arduino with the Adafruit NeoPixel library, is required. The length of the tape is 1 m, they can be freely combined, cut and extended.
LED strip with addressable RGB WS2811 diodes.Specification of NeoPixel Slim LED Dot Strand LED strip
- Diode layout: WS2811
- LED size: SMD 3535
- Type of LEDs: LED RGB addressable (aRGB)
- Supply voltage: 5V
- Power consumption per meter: 4.8 W (max)
- LED spacing: 50 mm
- Number of LEDs per meter: 20
- Cable color: silver
- Tightness class: IP65
- Length: 1 m
