Product description: Filament Rosa3D PETG CarbonLook 1.75 mm 0.5 kg - Carbon Black
PETG filament (polyethylene terephthalate with an admixture of glycol) in black color . It contains the addition of carbon fibers , thanks to which we can print models with a satin surface and almost invisible layers. With prints with thin walls, it is possible to obtain the effect of slight transparency. The PETG CarbonLook filament is characterized by good adhesion between layers and a low level of threading. It is used in 3D printers working in FFF / FDM technology. The material has been factory wound on a spool and vacuum packed, it does not require a closed chamber . The mass of the material wound on the spool is 0.5 kg and its diameter is 1.75 mm .
In our offer of filaments you will also find other materials and colors.
Filament Rosa3D PETG CarbonLook 1.75 mm 0.5 kg - Black.Application of the filament
- Prototyping
- Large format prints
- Housings/shades
- Decor
Properties of PETG CarbonLook
- Excellent adhesion between layers
- Satin print surface
- Odorless
- It does not show shrinkage, it does not need a closed chamber
- High precision of prints
- Ease of printing
- Chemical resistance
An example model printed with Rosa3D PETG CarbonLook filament.
Suggested printing parameters
| printing temperature | from 225°C to 250°C |
| table temperature | from 60°C to 80°C |
| Cooling | from 0% to 60% |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of PETG CarbonLook
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Color | Carbon Black |
| Print speed | From 60mm/s to 80mm/s |
| printing temperature | From 225°C to 250°C |
| table temperature | From 60°C to 80°C |
| Material density | 1.29g/cm³ |
| Material | PETG CarbonLook |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 0.5 kg |
