Product description: ReFill PETG Standard filament 1.75 mm 1 kg - Red Wine Transparent
Glycol in the composition of the PETG material guarantees high resistance to mechanical, chemical and atmospheric factors. It is resistant to stretching, odorless and has very low shrinkage. In addition, it is biodegradable and safe for the environment, does not contain and does not emit harmful substances. The product is fully compatible with printers that are not equipped with locks preventing the use of cartridges from third-party suppliers.
ReFill PETG Standard filament 1.75 mm 1 kg - Red Wine Transparent.
PETG Standard is safe - it does not contain and does not emit harmful substances.
Properties of PETG Standard
- Higher physical and chemical strength than PLA
- With good adhesion between layers - allows for high accuracy of prints
- Flexible and easy to print
- Biodegradable - decomposes in the natural environment
- Safe - does not contain and does not emit harmful substances
Suggested filament printing parameters
| printing temperature | From 220°C to 250°C |
| table temperature | From 60°C to 80°C |
| Print cooling | Recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of PETG filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Color | Transparent red |
| Material | PETG |
| head temperature | From 220°C to 250°C |
| table temperature | From 60°C to 80°C |
| Packaging | Printed cardboard |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 1 kg |
