Product description: Two Trees TS3 10 W laser plotter
A laser plotter designed for marking, engraving and cutting in a wide range of materials. The device uses the LD + FAC + C lens technology , which allows to obtain thin and even laser paths. The presented TS3 model has two light sources with a power of 5 W, allowing to obtain one, powerful beam with a power of 10 W. The plotter has a closed housing that increases work safety.
Presentation of the Two Trees TS3 laser engraver .
System of lenses and two laser light sources .
Advanced lens system
Advanced LD + FAC + C lens technology provides a more focused laser spot. This allows for thinner, smoother and deeper cuts.
Two laser light sources
Two 5 W light sources giving one powerful 10 W beam. This value is sufficient for cutting 8 mm plywood.
The metal casing of the device provides additional protection when working with the laser. It also prevents the formation of dust and smoke in the room where the plotter is located.
TS3 is a multifunctional device for engraving, marking and laser cutting various materials. Whether you are a hobbyist or a professional, the laser engraver can be used for a wide variety of projects.
Safety first and foremost
The TS3 plotter is equipped with a flame sensor, fire alarm, intelligent automatic shutdown function and a protective cover to ensure maximum safety of use of the device.
Internal rotary attachment
The rotary shaft located under the work table enables cylindrical engraving in the range of 360 °.
Honeycomb work table
The working table located in the closed chamber of the plotter, thanks to the unique honeycomb structure, enables light diffusion. It also provides adequate air flow.
External vapors exhaust pipe
The TS3 is equipped with a dedicated external exhaust with an additional fan, which allows to discharge vapors and particles generated during engraving to the outside (e.g. through a window). This element allows you to avoid dust and smoke in the room in which the device operates.
Communication with the user
The TS3 10W plotter offers several modes of communication with the user. The device can be operated via a cable via the USB socket, it also has a TF card slot. The engraving machine can also be operated via WiFi.
A wide range of processing materials
TS3 offers the possibility of marking a wide range of materials, incl. stainless steel, plastic, wood, leather, aluminum, spray coating, etc. A list of all compatible materials, broken down by the type of processing they can be subjected to (marking, engraving and cutting), is available here .
LD + FAC + C lenses
Compared to the LD + C lens technology, the LD + FAC6 + C lens used in the TS3 allows for a deeper cut thanks to clearer and thinner lines. It also leaves fewer traces of burning on the material. This type of optics is also characterized by higher efficiency and working power (97.3% of the 5.23 W laser light is converted into a 5.09 W laser spot). The compressed laser spot is 0.08 mm in size. The light from the LD + FAC + C lenses is collimated.
Laser calibration process .
Specification of the TS3 10W laser plotter
|Material of execution:||Aluminum profiles + metal|
|Laser power:||10W (compressed point laser)|
|Laser Wavelength:||445 nm +/- 5 nm|
|Engraving field:||300 x 200 mm|
|XY axis positioning accuracy:||0.1 mm|
|Engraving Accuracy:||0.08 mm|
|Engraving Speed:||10000 mm / min|
|Communication:||USB, TF card, WiFi|
|Engraving materials:||stainless steel, plastic, wood, leather, paper, spray layer etc.|
|Supported file formats:||NC, DXF, BMP, JPG, PNG, GCODE|
|Engraving Mode:||Image carving, Test carving, Scanning carving, Contour carving, Pixel carving|
|Supported Operating Systems:||Windows, Mac|
|Supported software:||LaserGRBL, Lightburn|
|Maximum continuous working time:||≤ 12 hours|
|Construction dimensions:||570 x 430 x 270 mm|