- On sale!
Product description: Neje 3 Plus - A40630 5.5 W - 255 x 420 mm laser engraving / plotter
The Neje 3 Plus laser plotter does not have a closed frame, which is why it is dedicated primarily to the processing of large-area materials. The manufacturer used a high-quality A40630 laser module in the device, which generates a power of 5.5 W and its wavelength is 450 nm . Works with materials such as wood, leather, plastic, rubber. The plotter has a working area of 255 x 420 mm . Neje 3 Plus uses the USB port to communicate with the computer. Additionally, the device is equipped with a Bluetooth wireless control communication module.
Neje 3 Plus laser plotter.
High accuracy laser.
Main features of the Neje 3 Plus laser plotter
- The length of the laser beam is 450 nm.
- The beam can be more focused than in CO2 lasers.
- The size of the working area can be freely extended.
- It has smaller dimensions compared to CO2 lasers, thanks to which it takes up less space and is easier to store.
- Cheap and easy to use.
- Working area 255 x 420 mm.
- Equipped with the Neje A40640 laser.
- Maximum laser power 5.5 W.
- Equipped with a Bluetooth wireless communication module for remote device management.
- Works with Windows, Android, iOS and macOS.
- It supports popular software such as LaserGRBL and Lightburn.
- It supports a wide range of products, incl. paper, plywood, wood, leather, plastic, PCB and some metals.
Advanced control system
- 338 dpi - allows for precise adjustment of the working area
- The frame structure allows you to work with an accuracy of 0.01 mm
- MEMS protection - if the engraving process is accidentally violated, the device will automatically terminate
- Bluetooth system - wireless control of the device via Bluetooth and mobile devices
- 3400 x 5600 px - allows you to engrave high resolution images
- 1000 mm / s - light weight allows the X axis to reach speeds of up to 60,000 mm / min
- 32-bit 200 MHz MCU - top 32-bit processor clocked at 200 MHz
- M8 M7 door - through M8, M7, commands, automatic air assistant and automatic fume extraction allows you to create an automatic system compatible with controlling the opening of the door.
Large working area of the laser plotter.
Sample engraver.
Advanced laser module Neje A40630
Neje 3 Plus is equipped with an advanced laser head - Neje A40630. Its maximum power is 5.5 W and the beam length is 450 nm. The single focus of the beam is 0.05 x 0.05 mm. The laser ensures high engraving accuracy and a clean edge, without the effect of burning.
What is a laser plotter?
A laser plotter or engraving machine is a device that allows you to create all kinds of patterns, images and shapes through non-contact thermal processing with the use of a laser head. With its use, it is possible to apply any pattern to virtually any material. The supported materials depend on the laser used, its power and the beam produced. Most plotters support materials such as wood and paper, the more advanced ones can even engrave in various types of metals and alloys. Laser plotters allow not only marking and engraving, but also cutting, which also depends on the power offered by a given laser head.
Specification of the Neje 3 Plus laser plotter
- Working area: 255 x 420 mm
- Spot Size: 0.075mm, 338dpi
- Resolution: 2400 x 5600 px
- Accuracy: 0.01 mm
- Max Movement Speed:
- X: 1500 mm / sec
- Y: 1000 mm / sec
- Frame material: aluminum alloy and PC
- Vertical carving: yes (45 ° C)
- Motor current consumption: 0.9 A
- Module height adjustment: yes
- Head position in Home mode: rear left
- Head position originally: left front
- Chip: 32-bit 200 MHz
- BLE control: yes
- MEMS protection: yes
- M7 control: yes (for building an automatic vapor expulsion system)
- M8 control: yes (for building an automatic airflow management system)
- Door control: yes (emergency shutdown)
- Limit switch: yes
- On / off switch: yes, manual
- Power supply: 12 V / 5 A - DC 5.5 / 2.1 mm
- Supported systems: Windows 7/8/10, Android, iOS, macOS, HarmonyOS
- Supported file formats: SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
- OTA Upgrade: Yes
- Software: Lightburn, LaserGRBL
- Working offline: yes
- Restore after power loss: yes
- Motor dimensions: 42 x 42 x 50 mm
- Construction dimensions: 550 x 480 x 140 mm
Neje 3 Plus laser engraving / plotter - A40630 5.5 W - 255 x 420 mm
Neje A40630 laser head.
Specification of the Neje A40630 laser
- Sharpness: 0.04 x 0.04 mm
- Optical power: 5.5 W
- Fan speed: 10600 rpm
- Interface: 4-pin PH2.0
- Power supply: 12 V / 4 A
- Beam length: 450 nm
- Number of LEDs: 1
- Light source: LD + FAC + C-Lens
- Temperature measurement: yes
- Power regulation method: PWM
- PWM input: 3.3V to 12V, 0kHz to 20kHz
- Continuous work: unlimited
- Fan speed control: yes
- Maximum cutting thickness: 18 mm
- Cutting speed: 120 m / min
- Dimensions: 40 x 50 x 60 mm
- Weight: 210 g
Kit contents
- Neje 3 Plus - A40630 12 W laser engraving / plotter - 255 x 420 mm
- Laser module
- 12 V / 4 A power supply
- User manual
- Protective goggles
- Toolkit
Kit contents.
Useful links |
