- On sale!
Product description: Adafruit Backpack - 7-segment LED display driver module - STEMMA QT / Qwiic - Adafruit 877
Adafruit Backpack is a module equipped with a driver for 7-segment displays with a diagonal of 0.56 " . The module is based on the HT16K33 driver, thanks to which there is no need to connect a large number of wires. Backpack for communication with the microcontroller uses the I2C interface. The board has two connectors for quick connection. - Qwiic / STEMMA QT . On the bottom of the module you can find jumpers for selecting the I2C address, so you can connect up to eight 7-segment displays. The module is powered with the voltage of 3 V or 5 V. The segment display must be purchased separately . into the plate.
The product is compatible with Arduino and Raspberry Pi
The manufacturer has prepared a user guide that presents connection diagrams and code examples in Arduino and CircuitPython.
Backpack board with HT16K33 LED driver for segment display.Pins of the 7-segment display module
Backpack uses the popular I2C interface for communication. The module is also equipped with 2 Qwiic / STEMMA QT connectors for quick connection with modules equipped with the same connector. The supply voltage is 3 V or 5 V.
- VCC - supply voltage 5 V / 3 V
- GND - the ground of the system
- SDA - data line of the I2C interface
- SCL - clock line of the I2C interface
Backpack segment display driver module specification
- Chip: HT16K33
- Supported displays: 7-segment, 4-digit
- Interface: I2C
- Backlight brightness adjustment: 1/16 steps
- Two Qwiic / STEMMA QT connectors
- I2C address: from 0x70 to 0x77 - selected with jumpers
- Requires self-soldering
- Backpack tile dimensions: 50 x 26.7 x 6 mm
- Backpack plate weight: 5.6 g
Kit contents
- Adafruit Backpack - 7-segment LED display driver module - STEMMA QT / Qwiic - Adafruit 877
- Golpin strip 6-pin 2.54 mm pitch
Kit contents.
