- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Module with 2.13" e-paper display with a resolution of 212 x 104 pixels. Communicates via the SPI interface. The display works with Arduino and CyrcuitPython. Thanks to the e-papertechnology the device does not tire the eyes like the traditional screens do.Displays 3 colors: black, white and red. This kind of displays can be used for reading e-books and e-journals.
The module has holes for soldering the goldpin strip, which is in the set.
|
The product is compatible withArduinoand CyrcuitPython The manufacturer provides auser's guidefor Arduino and CyrcuitPython. |
Inputs
The device has an 8-pin connector.
| Pin | Description |
|---|---|
| VIN | Supply voltage: 3 V to 5 V. |
| 3V3 | Output voltage 3.3 V, 100 mA regulator on the board. |
| GND | The ground of the system. |
| ENA | Pin-code activation. |
| SCK | Clock line of the SPI bus. |
| MISO |
Input data line of the SPI bus. |
| MOSI | Output data line of the SPI bus. |
| ECS | E-Ink Chip Select is needed to control the display. |
| D/C | Pin code selection transmit: data/command. |
| SRCS | Pin Chip Select for SRAM needed for communication with the system memory. |
| SDCS | Pin Chip Select for the SD card needed to communicate with a full expansion slot for SD cards. |
| RST | The system reset. |
| BUSY | Busy Pin, may remain not connected. |
Specification
- The module is compatible with Arduino and CircuitPython
- Supply voltage: 3 V to 5 V.
- Interface: SPI
- Displayable colors: black, white and red
- Resolution: 212 x 104 pixels
- External dimensions: 62 x 40 x 5 mm
- Weight: 13,4 g
Useful links |
