- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Multimeter can measure voltage DC and AC up to 500 V, the speed of flow of direct current up to 200 mA, and resistance up to 2000 ohms. The device has a measuring function, sound indicator, diode measurement test and exceeding the range.
The meter is powered by the popular batteryCR2032, which is also included. The battery discharge, s displayed on the digital indicator. Everything is enclosed in a protected, original box.
Features
- CAT II 500 V / CAT III 300V
- automatic polarity indication
- automatic reset
- measuring voltage: 500 V AC and 500 V DC (max.)
- measure current: DC 200 mA max.
- measuring resistance: 2 mω
- with permanently connected test leads
- pollution degree 2
- Important safety information
Set includes:
- Multimeter Velleman DVM 811.
- Test leads.
- Battery CR2032.
- Manual in Polish and English.
- Warranty: 24 months.
Technical specification
| Option | Range |
|---|---|
| DC voltage | 200 mV / 2 V / 20 V / 200 V / 500 V |
| AC voltage | 200 V / 500 V |
| DC | 2000 µa / 20 mA / 200 mA |
| AC | not |
| Resistance | 200 Ohm / 2 kOhm / 20 kOhm / 200 kΩ/ 2000 ohms |
| Battery tester | yes |
| Continuity test | yes, if the resistance is below50 Ohm built-in buzzer beeps |
| Tester diode |
yes |
| Siren sound | yes |
| Ecveeding the range | yes |
| Battery indicator | yes |
| Display | LCD 1999 (32 x 14 mm) not more than 1999 characters |
| Mode selector | manual |
| Transistor tester | no |
| memorization of data | no |
| Backlight | no |
| automatic shut-off | no |
| Dimensions | 97 x 51 x 27 mm |
| Weight ( with battery) | 100 g |
| Power supply | CR2032 battery (included) |
| Fuse | F0,5 A / 500 V 5 x 20 mm |
| Terms of use |
temperature: 0 °C to 40 °C humidity: < 80% RH |
| Storage conditions |
temperature:-20°C - 60°C humidity:< 90% RH |
| Probe | CAT II 100 V / CAT III 600 V, 10A, L = 70 cm (wired) |
