- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Devil Design PLA 1,75 mm 1 kg - Purple
The1.75 mmdiameterpurplePLAcartridge for3D printersis sent in the form of a fibre wound on reels of 200 mm diameter. The whole is safely vacuum-packed with the addition of a moisture absorber. The Devil Design pillars are designed for all 3D printers not protected against the use of third-party cartridges and for open source devices. Suggested printout parameters using the described filter are: head temperature between200°C and 235°C andtable temperature from 50°Cto 60°C.The manufacturer recommends cooling the printout.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1.75 mm 1 kg - purple.
Properties of the PLA pillar
Filament PLA is a thermoplastic polyester produced from renewable raw materials, thanks to which it is biodegradable.PLA is characterized by a very low shrinkage of the material and increased resistancetoUVrays. Due to its minimal water absorption, it is used, among others, for the production of food packaging, surgical threads and even implants. The described filament is characterized by a poorly perceptible smell. What is more, it is not flammable, which significantly increases work safety. PLA is a material fullywaterproofand characterized by high warpage resistance and durability. Due to its properties and ease of use, PLA is intended, among others, for beginner users of 3D printers.
Suggested print parameters for filament
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the Devil Design pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0.05 mm |
| Colour | Purple |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool - material | PLA |
| Reel diameter | 200 mm |
| Reel width | 100 mm |
| Mounting hole diameter | 52 mm |
| Package | Printed carton |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 205 x 205 x 80 mm |
| Net weight | 1 kg |
Useful links |
