- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol Redox pack 250 mAh 20C 2S 7.4 V
Redox brand universal lithium polymer battery pack with 250 mAh capacity, consists of two cells. The output voltage is 7.4 V, and the constant discharge current is 20C (5 A). The outputs of the battery are wires terminated with DEAN socket and output to the balancer. Li-Pol batteries are mainly used in modeling and robotics.
Li-Pol Redox 250 mAh 20C 2S 7.4 V battery.
The Li-Pol Redox 250 mAh pack has a DEAN connector.Redox battery specification
- Battery type: lithium polymer
- Connectors: DEAN socket and output for balancer type 3EModel/Redox
- DEAN cable length: 11 cm
- Maximum charging current: 1C (0.25 A)
- Voltage: 7,4 V
- Capacity: 250 mAh
- Constant discharge current: 5 A (20C)
- Battery dimensions: 35 x 20 x 10 mm
- Weight: 20 g
We also offer chargers adapted to pack connectors.
How to charge Li-Pol batteries?
When using Li-Pol pack s you should pay special attention to proper charging of the cells. It is important to maintain balanced cells, that is, evenly charge (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs. We recommend the simplest compact chargers or advanced microprocessor based chargers available in our range. Storage of the packs is also an important issue. If the cells will not be used for a long time it is worth putting them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
