- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer resin Flashforge Standard LCD 1 kg - Red
Photopolymerresin from the Standard product line, manufactured by Flashorge. Used in 3D printers, using UV light emitted by the LCD projector to form models. The product cures under the influence of a light wave of 405 nm. Material for printing in red color. Package contains 1 kg of resin.
Always use protective equipment: goggles and nitrile gloves when working with the resin.
Resin for 3D printers Flashforge Standard LCD 1 kg - Red.
Example printouts with Flashforge Standard resins.
Flashforge Standard resins
- Can be used in most UV LCD printers available on the market
- Finished 3D models produced with the resin are highly detailed and uniquely textured, and durable
- Resin cures quickly and evenly
- Photopolymers from the Standard product line are characterized by low shrinkage
- Can give off an unpleasant odour during printing
- The moulded resin is easy to clean and paint
- Wide range of applications: from amateur use to component prototyping
Flashforge Standard LCD 3D Printer Resin Specifications
| Parameter | Value |
|---|---|
| Manufacturer: | Flashforge |
| Resin type: | LCD photopolymer |
| Color: | red |
| Density: | 1.05 to 1.15 g/ml |
| Viscosity: | 250 to 350 cps (at 25°C) |
| Shore hardness: | 85 D |
| Tensile strength | 48 MPa |
| Tensile elasticity: | 2250 MPa |
| Tensile elongation: | 10% |
| Bending strength: | 86 MPa |
| Resin weight per package: | 1000 g |
Useful links |
